1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

ramsey dual output

Discussion in 'Flat Fender Tech' started by gochippermoon, Apr 15, 2013.

  1. gochippermoon

    gochippermoon New Member

    I just bought a 1954 3b. It came with a Ramsey single stick dual output in a box.. Is it worth anything?? Can't find much info on . Are these outputs rare??
    Jim
     
  2. nickmil

    nickmil In mothballs.

    Not rare but do have value. Depending on which model it is it could be a sought after item. I'd check the model # first and condition. Can you post a pic?
     
  3. gochippermoon

    gochippermoon New Member

    I'll post a pic when I get home. I was looking on google and saw an old listing on ebay $999.00 Looked just like it. Seems high to me..
     
  4. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Not particularly rare- single stick dual outs may get $150- $200 depending on model & condition. The rare (i.e. $$$) ones are the twin stick models- they can hit $600+

    H.
     
  5. Bill F

    Bill F Finally running

    Also the single stick military ones are worth a lot of money. Model number 105a.
     
  6. gochippermoon

    gochippermoon New Member

    The model # is Ramsey PTO 1 PT-1 T Whats it worth?? Will it fit a 3B?
     
  7. joe51

    joe51 Member

    What's so specail about them? Did they have single or duel output?
     
  8. gochippermoon

    gochippermoon New Member

    This one mentioned above has dual output.
     
  9. Bill F

    Bill F Finally running

    The 105a has duel output, but it was part of the ramsey 50 winch package for the m38/m38a1. The ramsey 50 winch is the rarest part for the rarest production jeep.
    [​IMG]

    [​IMG]
     
  10. 48cj2a

    48cj2a http://bantamt3c.com



    They also fit high and tight for ground clearance. The front output was for a winch while the rear powered aux equipment like belt driven generators for Commo gear.
     
    Last edited: Apr 17, 2013
  11. 48cj2a

    48cj2a http://bantamt3c.com

    The PT1-T is for the Willys Trucks, Wagons and Panels. While they will technically bolt to the Spicer 18 transfercase, the T models are clocked or offset differently than the CJ models or PT1-J.

    I have some examples of fitment of various Koenig and Ramsey PTOs on my 48 CJ-2A to illustrate this: http://48cj2a.com/ptos.htm near the bottom of my webpage.
     
    Ol Fogie likes this.