1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

givemethewillys's Recent Activity

  1. givemethewillys liked EFranzen's post in the thread Fun While It Lasted.

    Update, the CJ5 is back on the road with the replacement boat engine swap. I used the block, crank and pistons from the boat motor and...

    May 14, 2024 at 1:08 PM
  2. givemethewillys liked Oldpappy's post in the thread Fun While It Lasted.

    With a hole in the pan there wasn't enough oil let to cool it down. When I divorced my 2nd wife I let her keep the two year old 92 Jeep...

    May 14, 2024 at 1:05 PM
  3. givemethewillys liked Jw60's post in the thread Woodstock.

    Back in "the day" we had an Allis Chalmers 190 with a cab. (No air conditioning kids, just a fan and maybe the option for heat). Summer...

    May 14, 2024 at 8:06 AM
  4. givemethewillys liked Buildflycrash's post in the thread What Did You Do To Your Jeep Today?.

    Total frame and underbody restoration. [img] In under 10 minutes. [img]

    May 14, 2024 at 8:04 AM
  5. givemethewillys replied to the thread Woodstock.

    Love it!

    May 13, 2024 at 8:00 AM
  6. givemethewillys liked timsresort's post in the thread Woodstock.

    The final day on the ventilating windshield project. Reassembled the inner to the outer, and got it on the jeep. The only remaining...

    May 13, 2024 at 8:00 AM
  7. givemethewillys replied to the thread Need Some Help With My 1972 Cj5.

    Ideally, you'll want the angle coming down from the transfer case to match the angle going up from the pinion on the axle. Otherwise...

    May 12, 2024 at 6:25 PM
  8. givemethewillys liked timsresort's post in the thread Paint, My Nemesis.

    Update to this. I basically waited winter out, but then had to decide my next move. I called several Martin Auto Color stores, (the one...

    May 12, 2024 at 4:39 PM
  9. givemethewillys liked Jw60's post in the thread Rebuild For "miles".

    Since I was at the shop, I left with a spindle in the chuck for another day. I don't have plans to go full floating but if I were to...

    May 11, 2024 at 5:17 PM
  10. givemethewillys liked Jw60's post in the thread Rebuild For "miles".

    Wash rinse repeat with the other half: [IMG] [IMG] [IMG] This side could have turned out a little better but the metal was raised a bit...

    May 11, 2024 at 5:17 PM