Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
Dismiss Notice

Recent Activity

Activity stream for all registered members at ECJ5.

Stakebed liked H Tate's post in the thread 304 Starter Motor.

Success!! It only took about 30 minutes and I also replaced the 3/4" bolts that barely made it to the threads with 1-1/4" bolts flat...
May 4, 2024 at 4:28 PM
amboynut replied to the thread Speedo Gears - Where To Find And What To Get?.

"I'll give it a go on the old southbend." = "I'll try to make the correct gear on the South Bend lathe."
May 4, 2024 at 4:21 PM
Danefraz liked SIDSCJ's post in the thread What's your other project (non Jeep) . . . show them off here!.

Reminds me of my Ringmaster Jr from many moons ago. Build,fly,crash, rebuild, fly, crash etcetc
May 4, 2024 at 4:01 PM
Danefraz liked Twin2's post in the thread What's your other project (non Jeep) . . . show them off here!.

build fly again . would last about 10 seconds in these hands
May 4, 2024 at 4:01 PM
mikvar moved from Frankenmuth, Michigan to Frankenmuth, MI.
May 4, 2024 at 3:28 PM