We get a very very small amount of oily residue in the trap sometimes after a long day of wheeling.But I am not sure if this just residual oil in...
I modified a Saden compressor that came stock with my buddy's jeep we just drilled and tapped the fill plug 1/4-28 for a zerk fitting pumped it up...
The Dauntless will surely run 180 out you will know right away from the backfiring and such but it will run 180 out. And you keep saying there is...
Did you pull the ballast resistor from the original points system. Check and make sure you have 12 volts coming into the distributor if here is...
There is a bunch of pics here http://picasaweb.google.com/71jeep/Jeep?feat=directlink in my album take a look.This is three inch exhaust I know it...
http://picasaweb.google.com/71jeep/Jeep?feat=directlink Check out the link it has more pics of the heep I need to put some more up to date pics...
Rich I purchased prebent elbows in a few different radius's and cut and fitted them to what you see. The flanges were CNC milled out of 3/8...
Here is the set I built for my 4.3 in the 71 they are not exactly shorty but hope they help. [IMG] [IMG] [IMG]
Yup sure will no problems.
:cheers:That's the best place to start :cheers:
Hi All.. I have been looking on the internet and can not for the life of me find anyone that makes a set of replacement stainless tailgate...
LowslowTJ... You can buy an already assembled or as a kit ,if you are interested in trying MS save yourself some money and build the computer...
I heard years ago of guys running the 231 crank trigger that MSD used to/still make to run the ECU and I was also told this by Howell fuel...
Hudsonhawk I have always had better luck with the extra code and I run fuel only as well the guys that work on that code really put allot of time...
Separate names with a comma.