Update, the CJ5 is back on the road with the replacement boat engine swap. I used the block, crank and pistons from the boat motor and everything...
That looks like the exhaust stud from the driver side that holds the oil dipstick bracket.
Grandson said that it just started slowing down, smoking and looked like the Valdez was behind him. So, if the boat engine is a bust, what easy...
Bummer, there's a big chunk out of the bottom of the cylinder.
I sourced another 225 from an old boat. Hopefully it was not the anchor. Everything else besides the crank and two rods still looks good. The...
Bummer, the Jeep had a great 4 month run and then I got the phone call. Grandpa, there's a hole in the engine (actually, the oil pan). Any ideas...
Not new, Just cleaned up with wire brush and Rustoleum Hammer Aluminum
I bought this basket case two years ago. Finally finished it up this weekend. Every part disassembled, cleaned, painted and reassembled with new...
Future supervisor hard at work.
Fresh from the sandblaster
Yeah, after two years, finally done.
Original dash was trashed, so made a new one and took the liberty to put things where I wanted.
Separate names with a comma.