1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

CJ5 driveshaft u-joints fit CJ2A front driveshaft?

Discussion in 'Flat Fender Tech' started by equin, Sep 14, 2005.

  1. Sep 14, 2005
    equin

    equin New Member

    Lancaster, TX
    Joined:
    Sep 29, 2004
    Messages:
    34
    Hi Folks,

    Does anyone know if the u-joints from an early CJ5 front driveshaft will fit a 47 CJ2A front driveshaft? Reason I ask is that I have a CJ5 front driveshaft complete with u-joints and a CJ2A front driveshaft with no u-joints. Rather than go out and buy new u-joints, I'd like to use the ones from the CJ5 driveshaft if they'll fit.

    FWIW, the CJ5 front driveshaft is markedly longer and thicker than the CJ2A front driveshaft, but it bolts right up to the CJ2A if lifted several inches. I've already lowered my CJ2A back down to its stock height and want to install the stock CJ2A front driveshaft.

    Thanks for any info.
     
  2. Sep 14, 2005
    m38willys

    m38willys Jeep Vice 2024 Sponsor

    Green Cove...
    Joined:
    Sep 30, 2002
    Messages:
    690
    The U-joints should be the same size.
     
  3. Sep 14, 2005
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,262
    Well....maybe.

    I had front D27's from a '64 and '66. Both were originally 4 cylinders, but the '66 was a diesel. The axles had different sized yokes, with the '64 having the larger one:

    [​IMG]

    So I guess the answer is...meaure things...if they fit, they'll fit...;)
     
  4. Sep 14, 2005
    equin

    equin New Member

    Lancaster, TX
    Joined:
    Sep 29, 2004
    Messages:
    34
    Thanks for the replies, fellas. Interesting that the diesel's driveshaft was smaller than the other's.

    Anyway, I tried to cross-reference part no's on d/shaft u-joints for CJ2A's and CJ5's on Autozone's and Napa's website, but neither had any reference for the CJ2A. I did find, however, the same "item no." for these u-joints for the CJ2A, CJ3A, CJ3B and CJ5 at JC Whitney's website (they were $14.99 each, by the way). So my guess is that they should fit. I'm hoping I'll have the time tonight to remove the CJ5 front driveshaft so I can measure the yokes on both. I guess if they measure the same, they should fit. I'll post on here when I get a chance for the benefit of anyone else with a similar issue.

    Thanks again,
     
  5. Sep 21, 2005
    Gump

    Gump Old Timer

    Bethel, CT
    Joined:
    Jun 1, 2004
    Messages:
    236
    Looking at Walck's part numbers, the 25, 27 & 30 take the same U-joint. So 1945 to 94 use the same (95 different(?)). I know my 48 2A uses the same joint as my 93 YJ. I would still measure tho.
     
  6. Sep 21, 2005
    ljspop

    ljspop Lurking Bronco Dude

    San Diego, CA
    Joined:
    Jan 29, 2003
    Messages:
    394
    V6's 5's used the smaller driveshaft yolks also i think.
     
  7. Sep 22, 2005
    equin

    equin New Member

    Lancaster, TX
    Joined:
    Sep 29, 2004
    Messages:
    34
    Thanks for all the replies, fellas. Well, I was mistaken about one thing. The longer, thicker CJ5 driveshaft is actually a rear driveshaft. The one that's on the front is the same exact length and diameter as the supposed original front driveshaft. So either the previous owner was mistaken in telling me it had CJ5 driveshafts, or he meant that only the rear was a CJ5, or the CJ5 and CJ2A share the same front driveshafts.
     
New Posts