Glad it all worked well I did notice a mud dauber nest in the blower so you might want to Check thst out. The core never leaked so it should be...
That is correct my friend. I just wanted to note that it came out of a tux park just in case someone needed it to finish that special tux...
Yes. It is the same one in the picture I posted.
Just spoke to Debella’s and they said this clutch will work on the F134 as long as you have the correct flywheel with the right bolt pattern.
Sold !
One of the pieces of ductwork is still in good shape, the other piece just needs some small repairs. I used some very thin sheet metal to repair...
I bought it from Debella’s. Maybe it is for a 6 cyl. [img]
I bought it for the F134. I think if you have the right flywheel you can use it on the Fhead. Someone with more knowledge than me can chime in....
Winner, winner my friend. Send me your address and I’ll get a price for shipping. I take Venmo. We can work out the payment details later on.
Sold, sold,sold. I bought this new old stock clutch and pressure plate for my 63 CJ5 but the holes were not right in the flywheel. I know somebody...
SOLD, SOLD I have a complete heater from a 1963 CJ5 Tux Park. It has the blower, coils, ductwork, switches, cables. The ductwork leaves a little...
Steering wheel is original from factory. It was color matched to the original color ( Indian Ceramic ) of the Jeep. As previously noted there has...
Well I got the Jeep running again. The problem turned out to be trash in in the carb. I have a fuel filter on the fuel line so it had to come from...
Separate names with a comma.