On the back burner, but I intend on refreshing the engine that I have. I want to put a set of forged pistons in it, but they will have to be...
Thanks! -Donny
This video is a classic example of way you don’t toss those old worn out parts in the trash bin. They are made better than the new crap parts that...
Though motor oil might meet a protection spec, you want to run a 90 weight GL4 gear oil in your CJ. I have a car that run sae 30 motor oil, and...
Wise move on pulling the timing cover to throughly check the oil pump and the rest o& everything else. Yes, it looks like you loosened the...
Can I ask for a measurement on the length of the axle shafts? Assuming they are 19 spline inner/27 spline outer? I collecting parts to build one...
I have a similar (older) Sunnen guide hone, and it works well. I also have a setup that sleeves the original worn guide. I ream the worn guide,...
Looks like 73 CJ5 has a growler in his collection of machine tools (see “Engine Tooling”). -Donny
I would still look for a NOS or used feed motor. The old machines weld so much better than the newer machines, in my opinion. I think is has to do...
I also have a number of engine machine shop tools/machines, many Kwik-Way branded. I have a couple of those electric valve seat grinders, and...
Separate names with a comma.