Magic
I took my stock size and had it reduced to 15". It was way too big and would hit my thighs. I have all stock. power steering. Love the wheel now....
RPM... I am eventually going to make a cover and paint it yellow so they are more "Hidden". But it does make engine work easy so you just see it...
Late...But...I've got factory power brakes, the booster goes directly into the Intake manifold vac source. That source is a big two port plug,...
Late...but hope it helps. [ATTACH] [ATTACH]
"74 Frame. Mine are welded on with a big rivet of some type too. 8 - are obvious. then there are 4-others mounted on the two cross members. [ATTACH]
There are two mounts by the firewall, most forward mounts on the tub.
The word I couldn't remember was vulcanization... That is the process of "melting" the windows into the top as they did from the factory. I...
Just something to think/look at. Some of the bolt holes on the Intake to Head are wet. They tap all the way through into the water passageways....
Did you find someone who can put new windows in with the "melting" of the vinyl to door, or did you have the new window sewn in? I haven't found...
That is a rear support for the bumper, driver side. Not sure what page, but there is a pic of the frame/engine taken overhead without the body on....
I went with Skyjacker - Soft Ride. 2"
Slightly smaller. 30" give or take a bit. But its a cold day here.
That is 100% factory '74 exhaust. I took it all off and had it sandblasted and then powder coated headers in black and in that 'gray' which is a...
Thanks... Sounds better than it looks too! Way past the seat latch part of things... Jeep is done. You'll have to go back several pages to find...
Separate names with a comma.