Cool. By coincidence I also have a 3 inch extension that I made for my bottle jack. :D [ATTACH]
That is the specification in the manuals I've always used.
I feel it is better and safer to snug them up securely first, to be sure everything is properly seated. Then back them off just enough that they...
Cleaned and dry, bearing rollers and their races should have shiny and perfect surfaces, no defects at all, and should feel perfectly smooth when...
It was dramatically better in my YJ.
Kinda reminded me of a door strike for a vintage car - but too heavy duty.
"Gee, it never did that before!"
I can't verify the actual diameter, but many people have used the type of motor used in '73 Blazer and similar, for retrofits. Worked extremely...
Well, yes. I once owned a GMC with LSD. The specified 'friction modifier' additive for the diff was whale oil. Truly. Good luck with that today!
Really not true. A factory manual, and a half hour of time would allow lifetime mastery. Kind of why I keep harping on this topic, however. As...
Yet another problem easily solved by keeping the windshield flat on the hood, where it belongs. :D
I'm old enough to have run such saws. Why chainsaws were invented.
Can you just measure them from your axles, or the old u-bolts? Jeeps had many different options for spring packs.
Read this if you want information rather than opinion. https://www.widman.biz/uploads/Transaxle_oil.pdf
I am the exception then. Not me. I keep everything as stock as possible, my legacy to future owners. As for all that dressing and changing and...
Separate names with a comma.