Dimension Request For 2g Throttle”bracket Adapter”

Is anyone willing to dimension or trace out the stock bracket that bolts onto the throttle lever of a 2g on a dauntless? Most important would be stud to hole, thickness, and a reference in relation to the dogleg tab. The dogleg itself is pretty self explanatory.

I don’t know how critical this is to proper pedal travel, feel etc, but I usually like putting things to factory or better and a rebuildable carb seems to be very hard to find or a good fraction of total investment

Thanks

 

I can pull mine this weekend and get some dims for you. You're talking about the pivot bracket that bolts to the backside of the transmission upper tunnel cover?

 

Hi homersdog, I’m talking about the bracket on the throttle plate

Not my picture, got it off the site. Don’t remember who to give credit to

 

Okay, I can get the dims for you this weekend. I'll get them sooner if I have a chance.

 

went out and looked
I get 15/16 from center of hole / carburetor linkage stud to add on linkage piece stud

 

Well I hope this is clear enough. If not I am in Tulsa if you are close enough you can come look at it.

 

Thanks homerdog, that is excellent. I appreciate it and hopefully your drawing can help others as well.

I do hope it’s worth the effort to make one… Mine has the correct bracket so this should provide some increased pedal movement. Which will be appreciated.