Oh, yeah, the selectable locker. I forgot about that. Guess you can't get a 19 spline ARB.
Thanks Jay, I think I have read that before, and I believe it led to expensive custom spindles being made to accept 30 spline shafts. A few...
Yes it does, the shoulder gets turned down enough to fit in the axle tube. If you have the option, D30 spindles have a little more meat on that...
I think you have time. You might need a hand getting the pan back on. And there are less expensive HEI options, and you could save the rotor,...
I'll mic the spindle tomorrow, but I think it's in the 10 thou area, to get 27x19 spline axles through.
Not good. Not sure why the shaft would rise up and disengage enough to strip it, if the hold down was in place. I think you can drop the pan,...
Picked up a nice little treasure. Dana 44 offset, 11"brakes, full floating axles with locking hubs. The price was right, so I dragged it home....
I was in Walmart today looking. Only had GL-5. Sal at Vintage Jeeper just this week posted a test he did with a brass blocking ring soaked in GL-5...
Separate names with a comma.