2x's the HP and torque and it weighs the same or slightly less! I love my conversion.
One of my trailers was a single axle trailer of that length. It was so short the front bumper and some of the front leaf spring in front had to be...
I think that they were used in the FC's and were cable actuated. I don't have access to any of my manuals but the Ramsey ptos could be adjusted...
Looks like it has bumper gussets meaning a CJ2A, park lamps are 47-49. No side bow pockets so either the body is modified or it's a 47 because...
Is R&P still around in the west. I've heard them mentioned before, Bill
I cut the backs of my original 15's and been driving on them for a while. I have 15x8 that would require to much cutting to fit over 11" brake...
Absolutely cannot live without mine.I have a 62 CJ5 w/ V6 conversion. List your seriel number and someone here will tell you the year. There are...
Check prices on ebay to get a feel for pricing. $7K is a good sum of money. Did you physically get under the jeep to inspect the frame and tub?...
Might be a second version Converto dump trailer. Make sure it has a suspension because the first did not. Pintle was replaced. I'm just guessing...
There was an old man down the road who had a brother who drove a jeep pulling gang mowers on a golf course. It had duallys front and rear.
Found this on the CJ3B site. [img]
Doesn't R&P out west convert 27 powerlocks to fit in 25's? They would be the guys to ask.
I know you could get powerlocks front and rear as that is the way my CJ5 came in 1962. Still has the tags on the diffs. Not sure about Trac locks,...
It's funny but I spoke w/ a retired guy from Dana and he was there when the jeeps first came in for testing, as in MA, Bantam, and GP. I asked...
Separate names with a comma.