Has anybody seen the MRF "Superlug" 7.00-15 in the flesh? Based on the pictures it's sort of a cross between the old NDT military tires and a...
Not to mention that Teflon turns out to be pretty nasty for humans and the environment: [MEDIA]
Thanks for the tip on those, I've been hoping to find some more convex replacement lenses. I love the light of the Hellas, but they are way too...
I have one, or I think I still do. I was never able to get any really satisfactory results out of it. Now, welding a bung in the exhaust below...
I really appreciate the fold and tumble passenger seat and would much rather keep the stock seats. Mine have replacement covers hog-ringed on over...
North makes a low-profile n99 unit and I've seen others as well. When welding crusty stuff or stick welding it really does help keep the smoke...
I have some information about my life as a Ferret_Fancier here: Ferret 38C5968
I too started to use Silglyde as an assembly lube for brakes a few years ago and haven't had anything happen to make me regret it. My rationale...
This reminds me to mention old CNC equipment. I picked up a CNC mill for about $600 a while ago, cost me another $1500 and some hair-loss to get...
I can share that the ArcOne helmets are garbage. The cool new shade where you can see color and the price was reasonable but only 2 sensors,...
Expect, ah yes, expect... I've seen brand-new but junky mill-drills with some pretty awful leadscrews and leadscrew bushings, enough that holding...
I see 10EEs around here, $6k for a good runner and $1500 for a project. Once you use one, you will never feel comfortable standing in front of a...
A center finder has been mentioned but an edge-finder for the mill is extremely useful. Did nobody mention a clamp-block set yet? Well, you...
Thanks for that. From the picture.video it really does seem like my inner seal failed and somebody just used what was left as a bit of a shield!...
OK, so I looked at the manual and convinced myself it was fine to apply a bit more force and the axle pulled right out. I've included pics of the...
Separate names with a comma.