Can you post a picture. Have you used it to run a charger? Jon
Looks like for a truck or wagon not cj. You can compare from link. http://hermtheoverdriveguy.com/wp-content/uploads/2012/11/DSCF0027.jpg
When I had this problem pvc was problem I blew out all the pvc lines pulled apart pvc and cleaned it, I'd also check vacuum too. Jon
Nice! My dogs love putting there nose out my ventalated windshield lol
Yep the seats could use some work lol, I'm going to get them redone one of these days. Slowly I've been fixing and rebuilding parts or areas.
I forgot to add, it's fun to find parts to.
[ATTACH] My 58, is stock only things I've added are options from the time, and seat belts. Still 6 volt. Rusty faded paint drive it 3 to 4 times a...
I removed all body mounts and removed fuel line from pump, loosened the Ross steering box and moved body back. Both fenders were removed also, I...
Have you checked or adjusted your valves? When I got my trusty rusty cj5 my compression was worse, I adjusted valves and got it up. Later had to...
When I had mine I just moved the body back to drill it out. You will have to drain coolant. Good luck
Best "screw extractors" I've ever used are squares or I use an Allen socket I drill a hole a little under sized then tap in Allen socket, this...
I've had luck with harbor freight model. A lot of folks don't even know tool is around.
Impact driver. Handy tool. Impact driver - Wikipedia
Separate names with a comma.