-
Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.Dismiss Notice
homersdog's Recent Activity
-
homersdog liked nickmil's post in the thread 231 Even Fire Flywheel.
Most of the smaller flywheels were because of a smaller diameter bellhousing to fit in the smaller transmission tunnels of many later...
May 11, 2024 at 7:22 AM -
homersdog liked Jw60's post in the thread Rebuild For "miles".
Wash rinse repeat with the other half: [IMG] [IMG] [IMG] This side could have turned out a little better but the metal was raised a bit...
May 11, 2024 at 7:17 AM -
homersdog liked Jw60's post in the thread Rebuild For "miles".
I actually did a thing today! (Busy week with lots of free lunches so I didn't run home -except to mow-) Ok the new to me powr-loc has...
May 11, 2024 at 7:17 AM -
homersdog liked Buildflycrash's post in the thread Scott's '66 Continuous Modifications..
Here’s a couple more pictures. My rollbar (C pillar?) gets tighter as it goes up so the space for the rack is pretty small. [IMG] A...
May 11, 2024 at 7:12 AM -
homersdog liked Jw60's post in the thread Rebuild For "miles".
It's been a good top, I need to start thinking about replacing windows, zippers, vinyl, and add a bar or plate to keep it from wearing...
May 10, 2024 at 3:50 PM -
homersdog replied to the thread Rebuild For "miles".
Some one else actually has a top like yours Joe! http://www.ewillys.com/2024/05/10/1969-cj-5-tucson-az-4500/
May 10, 2024 at 7:34 AM -
homersdog liked Fireball's post in the thread Car Trailer Mods.
Drilled new holes in the right place and painted my adapter: [IMG] Another piece of the winch puzzle I forgot to mention is a...
May 9, 2024 at 7:26 AM -
homersdog liked Jon B.'s post in the thread Intermediate Frankenjeep Build.
Yes, I’m still working on the project! Much of the recent stuff is piddly little bits; hardly worth mentioning. But… …today’s delivery...
May 9, 2024 at 7:22 AM -
homersdog liked DanStew's post in the thread 1944 Ford Gpw.
Time to start a thread for this rig. I picked it up last month because it was a smoking deal. Original shipped to Colorado in 1944,...
May 8, 2024 at 5:16 PM