1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

which fender?

Discussion in 'Builds and Fabricators Forum' started by unclebill, Apr 11, 2009.

  1. unclebill

    unclebill Banned

    i paid my money .
    now i have to make a choice.
    if i choose the OEM one with the indent i will have to fill it with bondo.
    on the other hand here is an aftermarket one.
    they cost the same.
    keep in mind i have never filled a hole or used bondo.
    [​IMG]
    [​IMG]
     
    unclebill, Apr 11, 2009
    #1
  2. Patrick

    Patrick Super Moderator Staff Member

    That's way too much to fill with bondo. IMO.

    Which one is aftermarket? The one with the indent has no holes for the marker light.
    That one is off of a postal Jeep I'd bet. There is holes from the fender mounted turn signal and the little "cage" that protects it. It looks like the right shade of blue as well.
     
    Patrick, Apr 11, 2009
    #2
  3. Boyink

    Boyink Super Moderator Staff Member

    My dad tried the bondo route. Lasted a couple of years and started falling out. Buy some little stick on reflectors and call it good.
    Posted via Mobile Device
     
    Boyink, Apr 11, 2009
    #3
  4. unclebill

    unclebill Banned

    it is for this
    [​IMG]
     
    unclebill, Apr 11, 2009
    #4
  5. unclebill

    unclebill Banned

    aftermarket
    [​IMG]
     
    Last edited: Apr 11, 2009
    unclebill, Apr 11, 2009
    #5
  6. Patrick

    Patrick Super Moderator Staff Member

    I know what it's for.;)
     
    Patrick, Apr 11, 2009
    #6
  7. Patrick

    Patrick Super Moderator Staff Member

    Yep, it'll make that indent look less "vacant". NAPA or the like should have them, inch or so wide and 3 or 4" long with double sided tape on the back.
     
    Patrick, Apr 11, 2009
    #7
  8. unclebill

    unclebill Banned

    having an indent and reflectors on ONE side of my willy's
    would be a fashion statement indeed...:beer::beer::beer::beer:
     
    unclebill, Apr 11, 2009
    #8
  9. Patrick

    Patrick Super Moderator Staff Member

    Oh.:oops: I didn't even think about that.:oops:
    That just wouldn't do.
     
    Patrick, Apr 11, 2009
    #9
  10. unclebill

    unclebill Banned

    since i already bought one of them i'll go with the A.M. one.
     
    unclebill, Apr 11, 2009
    #10
  11. Patrick

    Patrick Super Moderator Staff Member

    [​IMG]
     
    Patrick, Apr 11, 2009
    #11
  12. unclebill

    unclebill Banned

    i figure for 50 bucks what the hey!
    at least then my right fender wont look like a used kleenex.....R)
     
    unclebill, Apr 11, 2009
    #12
  13. kiowamtp

    kiowamtp Member

    I thought the one without the indent is original "style" for your year JEEP. What's the difference?
     
    kiowamtp, Apr 11, 2009
    #13
  14. unclebill

    unclebill Banned

    one is made of thicker metal than the other.
    if i couldve bondo'd the original part i prolly would have gotten it.
     
    unclebill, Apr 12, 2009
    #14
  15. jrp

    jrp Member

    before bondo they wiped lead to fill voids and seams in cars
    JRP
     
    jrp, Apr 12, 2009
    #15
  16. Boyink

    Boyink Super Moderator Staff Member

    Might consider buying the OE part as a backup. IIRC others have mentioned the aftermarket parts falling apart at the spot welds over time.
     
    Boyink, Apr 12, 2009
    #16
  17. unclebill

    unclebill Banned

    sound advice once again.
     
    unclebill, Apr 12, 2009
    #17