1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

need help with fuel gauge on speedo cluster

Discussion in 'Intermediate CJ-5/6/7/8' started by grabbem88, Apr 25, 2008.

  1. grabbem88

    grabbem88 Member

    i have a 1980 cj-5....interior is basically stock except for added gauges,and a new wiring harness


    awhile back my gas tank lines were deteriorated/corroded...dropped tank sending unit was shot!

    so i replaced all of that..made sure ground was good

    but...gauge still does not work

    i checked wiring power and sender wires look ok,but what did notice was is this...

    put power on where sender is gauge goes past full switch it back stays at empty


    is there a way to fix it?
     
    grabbem88, Apr 25, 2008
    #1
  2. Ab

    Ab Member

    Ab, Apr 25, 2008
    #2
  3. bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    click save...thanks Ab, nice to see ya on the boards :)
    Jim S.
     
    bkd, Apr 25, 2008
    #3
  4. grabbem88

    grabbem88 Member

    well i tested resistance...hot on pink black on a ground...i got 29.5... or does it have to be ground from sender?
     
    grabbem88, Apr 25, 2008
    #4