1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Windshield Replacement

Discussion in 'Early CJ5 and CJ6 Tech' started by beeser, Jul 27, 2007.

  1. beeser

    beeser Member

    I have a new windshield replacement for my CJ but don't want to go through the hassle of installing it myself. What's a fair price to have it done by a professional? Would it be a good idea to replace the gasket at the same time?
     
    beeser, Jul 27, 2007
    #1
  2. Boyink

    Boyink Super Moderator Staff Member

    I paid $50 labor, supplying all the materials and bringing it to them.

    I'd do the new gasket.
     
    Boyink, Jul 27, 2007
    #2
  3. beeser

    beeser Member

    Mike - Any other materials needed besides the gasket?

    BTW, what's a good source for the gasket?
     
    beeser, Jul 27, 2007
    #3
  4. Boyink

    Boyink Super Moderator Staff Member

    No...IIRC the glass and gasket and you're good to go.

    I'm sure all the usual suspects have the gaskets...can't remember where I got mine.
     
    Boyink, Jul 27, 2007
    #4
  5. beeser

    beeser Member

    Thanks Mike! Just ordered a gasket set on eBay. Looks I'll be good to go as soon as it arrives. I've been storing an NOS windshield in its original wood crate for a while. It'll be good to get it out of the way.
     
    beeser, Jul 27, 2007
    #5
  6. kaiser_willys

    kaiser_willys Well-Known Member

    bought my gasket at the place that cut my glass and installed it,they had it on a roll and sold it by the foot,new gasket makes the installation a whole lot eaiser,it is softer and more flexable
     
    kaiser_willys, Jul 27, 2007
    #6
  7. jpflat2a

    jpflat2a what's that noise?

    Steve
    did you buy the glass from a member here ?
     
    jpflat2a, Jul 27, 2007
    #7
  8. beeser

    beeser Member

    Don't think so but maybe. Came from a guy in Hays, KS. I think it was an eBay purchase.
     
    beeser, Jul 27, 2007
    #8
  9. jpflat2a

    jpflat2a what's that noise?

    thanks
    have you measured the NOS glass for correct size ?
     
    jpflat2a, Jul 27, 2007
    #9
  10. beeser

    beeser Member

    Nope. Caught me assuming that I bought one the correct size. I do recall the part numbers matching though. The box still has the manufacturer's tag on it. I'll measure everything before going further. Thanks for the heads up Jim.
     
    beeser, Jul 28, 2007
    #10