1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Fixed: V6 Cutting out at cruising speeds?

Discussion in 'Early CJ5 and CJ6 Tech' started by sparky, May 14, 2006.

Page 44 of 50
  1. Aug 8, 2006
    lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Huntingdon PA
    Joined:
    Sep 20, 2002
    Messages:
    3,437
    Excellent!! :D

    Tell us how you diagnosed it.
     
    lynn, Aug 8, 2006
    #861
  2. Aug 8, 2006
    jayhawkclint

    jayhawkclint ΜΟΛΩΝ ΛΑΒΕ

    Oklahoma City, USA
    Joined:
    May 18, 2006
    Messages:
    2,622
    Could you please post the part number you ended up using? I have a slight richness and was thinking about taking my carb apart.
     
    jayhawkclint, Aug 8, 2006
    #862
  3. Aug 8, 2006
    MOP

    MOP Active Member

    Pullman, WA
    Joined:
    Sep 25, 2003
    Messages:
    1,131
    Sparky, I hate to say this, but it has been mentioned, on page 27 ;):

     
    MOP, Aug 8, 2006
    #863
  4. Aug 8, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    I think I just got lucky last nite. I was out there with the vaccuum gauge to see what I could figure out. I had the starting fluid out spraying it around. The idle didn't go up but it smoothed out and the vacuum dropped when I sprayed it around the base. I thought that was wierd, I'd never caught it before, it was VERY slight though.

    Pulled the carb off, the gasket looked like it could've been leaking on one corner, so I replaced it with one I had from the rebuild kit I had laying around.*

    Now I need to retune the carb.

    So last nite I was driving it, I was so excited I didn't have my wallet. I went past the gas station and started running out of gas right there. R) I made it almost home and got some, then drove home.

    Clint, I'm not sure what PN I used, it's just one of the three or four that comes in the NAPA rebuild kit. I can take pics of the ones it's NOT for you. :D


    *I've not had this laying around the whole time, I just rebuilt my carb again and Spoon's on his Commando two weeks ago.
     
    sparky, Aug 8, 2006
    #864
  5. Aug 8, 2006
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350



    It didn't make the spread sheetR) R) R)
     
    blevisay, Aug 8, 2006
    #865
  6. Aug 8, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    He didn't say it was the wrong one. R)

    Guess I couldn't even keep up with what was in here. :oops:
     
    sparky, Aug 8, 2006
    #866
  7. Aug 8, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    I also didn't try it until last nite.
     
    sparky, Aug 8, 2006
    #867
  8. Aug 8, 2006
    solomon

    solomon Baby Jeep Junkie

    South MS
    Joined:
    Jul 19, 2006
    Messages:
    255
    I was sure this would hit 100 pages.

    Congratulations on finding the problem Sparky. God I hope I don't ever have to diagnose something like that.
     
    solomon, Aug 8, 2006
    #868
  9. Aug 8, 2006
    MOP

    MOP Active Member

    Pullman, WA
    Joined:
    Sep 25, 2003
    Messages:
    1,131
    I will not tell the all knowing co-worker of mine anything of this news..... I already have a hard time squeezing by his ego in a large room.
     
    MOP, Aug 8, 2006
    #869
  10. Aug 8, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    R) He doesn't get any :beer: or stickers.

    "No soup for you!"
     
    sparky, Aug 8, 2006
    #870
  11. Aug 8, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Now you know where to look first. ;)
     
    sparky, Aug 8, 2006
    #871
  12. Aug 8, 2006
    MOP

    MOP Active Member

    Pullman, WA
    Joined:
    Sep 25, 2003
    Messages:
    1,131
    I could always go over to Sparky's in the dark tonight and cut a notch out of his new carb gasket. The thread might hit 100 pages after that ;)
     
    MOP, Aug 8, 2006
    #872
  13. Aug 8, 2006
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350


    Triple dog dare ya
     
    blevisay, Aug 8, 2006
    #873
  14. Aug 8, 2006
    Mudweiserjeep

    Mudweiserjeep JEEP: Bouncy and Fun

    tipp city, ohio
    Joined:
    Jun 17, 2004
    Messages:
    718
    R)That would just be mean.........
     
    Mudweiserjeep, Aug 8, 2006
    #874
  15. Aug 8, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Guess I need to find a new parking spot for my now running Jeep. R)
     
    sparky, Aug 8, 2006
    #875
  16. Aug 8, 2006
    cj5 buggy

    cj5 buggy Member

    hardeeville, SC
    Joined:
    Dec 12, 2003
    Messages:
    403
    Congrate to ya Sparky...
     
    cj5 buggy, Aug 8, 2006
    #876
  17. Aug 8, 2006
    mb82

    mb82 I feel great!

    Charlottesville Va
    Joined:
    Mar 17, 2003
    Messages:
    2,706
    My driveway should be a safe place R)
     
    mb82, Aug 8, 2006
    #877
  18. Aug 8, 2006
    solomon

    solomon Baby Jeep Junkie

    South MS
    Joined:
    Jul 19, 2006
    Messages:
    255
    Maybe a shotgun and a lawnchair would be in order.
     
    solomon, Aug 8, 2006
    #878
  19. Aug 8, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Carefull, my little sister might beat you up and take it from you. R)
     
    sparky, Aug 8, 2006
    #879
  20. Aug 8, 2006
    lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Huntingdon PA
    Joined:
    Sep 20, 2002
    Messages:
    3,437
    Well Sparky I'm going to take a lesson from you...
    I still haven't resolved my issue, haven't had time to work on it.
    I'm definitely going to be looking for vac leaks, bolts tight, etc... and if I do rebuild the carb, checking for gasket fit/leakage.
    Glad you got it resolved!!!!!!!!! :beer:
     
    lynn, Aug 8, 2006
    #880
Page 44 of 50
New Posts