1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Green Leather Shift Boots

Discussion in 'Early CJ5 and CJ6 Tech' started by HellaSlow, Jun 2, 2023.

  1. HellaSlow

    HellaSlow Member 2024 Sponsor

    Anyone have any experience dying leather? I want my shift boots to look like the kind you can get for an mb/2A but since I can't find anyone who makes green ones, I'm wondering if I can just dye my current brown ones green.

    64'CJ5, 4-speed T98

    Screenshot 2023-06-02 at 11.50.03 AM.JPG Screenshot 2023-06-02 at 11.46.49 AM.JPG
     
    Beach66Bum likes this.
  2. jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    A local auto store would have some fabric spray paint
     
  3. Oldpappy

    Oldpappy A.C. Fults - Curmudgeon at large 2022 Sponsor

    Last edited: Jun 2, 2023
  4. HellaSlow

    HellaSlow Member 2024 Sponsor

  5. Oldpappy

    Oldpappy A.C. Fults - Curmudgeon at large 2022 Sponsor

    Most of them you just apply the dye to the leather and let it dry, but there are different kinds of leather dye. I haven't used that particular Tandy product, but it should work fine, their stuff is always good just follow the directions on the bottle.
     
    HellaSlow likes this.
  6. Don X

    Don X The Prodigal Moderator Staff Member 2023 Sponsor

    Check with a she repair shop. Dying women's dress shoes used to be fairly common years ago.
     
    HellaSlow likes this.
  7. HellaSlow

    HellaSlow Member 2024 Sponsor

    Awesome! I can’t wait! Everything else is green or black so it’ll be nice to match
     
  8. Keys5a

    Keys5a Sponsor

    I hope you have a factory style rubber boot under your leather boot. These are necessary to keep water out of your transmission. Rain and wash water runs down the shift lever and right past the pivot ball without the tight rubber boot. Lots of transmissions/transfer cases have been ruined from water intrusion. Your leather boot isn’t snug enough to keep water out.
    -Donny
     
  9. 47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    To that end I squirted RTV right under where the rubber boot rides on the shifter and then pushed it down onto the bead.
     
  10. HellaSlow

    HellaSlow Member 2024 Sponsor

    :shock:I HAD NO IDEA!!!! Yikes haha. Looks like i'll be searching for a better rubber option! This is why I love this forum.
    Any advice on which rubber ones are worth it? I initially got the leather ones because the omix boots seemed so cheapo
     
  11. HellaSlow

    HellaSlow Member 2024 Sponsor

    Thats a good idea actually! I'm actually wondering of I can seal it up with a short length of heat shrink at the top. Like a little rubber ring that would crimp the top ends down.
     
  12. Keys5a

    Keys5a Sponsor

    There are some military parts houses that have OEM original parts, including these boots. They may be 40 or 50 years old, but they will outlast the reproductions (like Omix) by decades. Quarter Ton Military used to have originals, and Peter DeBellas Jeep likely carries them too. Just make sure you are getting real “old stock”. There are other suppliers too.
    I’ve had 1953 dated boots (from packaging) on a couple of my Jeeps for nearly 20 years now, and they are still soft, pliable, and not cracking or rotting.
    -Donny
     
  13. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Keep in mind that the true military boot is quite different than the civilian style since it is clamped top and bottom and seals completely in order to be submersible. Whereas the civilian boot is merely a snug slip-fit at the top end.