1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Speedo Help

Discussion in 'Early CJ5 and CJ6 Tech' started by Jonbbrew, Nov 11, 2020.

  1. Jonbbrew

    Jonbbrew Member

    4A077CC5-3E2B-4084-8C76-51E3DDAD7503.jpeg 4041E4E1-5912-458B-877E-173195A751AF.jpeg Hello all,

    Finally pulled dash. Found that all of the lights are missing. I do like the old speedo vs Omix replacement. Is there a way to get new light sockets to fit?

    Also is there a way to take it apart to clean out under glass?

    I’m going to not use temp or fuel meters as I’m going to install aftermarket ones.
     
  2. baldjosh

    baldjosh Member

    Its been a while since I took mine apart...ill look and see if I have some pictures
    I do have some original bulb sockets you can have... not sure what condition they are in... but if youre interested I will dig them out
     
  3. Jonbbrew

    Jonbbrew Member

    Cool. Thanks. I just took it off dash and now it’s looking like there was never lights to light up the speedo? Only the warning lights for oil, high beams and amp? The other holes don’t have notches in them for light socket ( if I am seeing that right?) I tried to shine a light in them from behind and doesn’t appear to light up speed at all. Looking further doesn’t look like there is a way for the light to get to front around edges of glass or through numbers.

    thoughts?

    I am newer to Jeeps so not sure how these things are. Seems like if rigs had lights the speed should show fir night driving.
     
  4. durangotang

    durangotang Member 2022 Sponsor

    Google "instrument cluster bulb socket" and you'll find plenty, might have to go with plastic ones though.
     
  5. Lewissa81

    Lewissa81 New Member

    Dorman 1815's fit but since they are cheap I had to adjust some of the prongs so that they'd stay in.
     
  6. Jonbbrew

    Jonbbrew Member

    And the difference between the holes with notches and without isn’t an issue?
     
  7. Jonbbrew

    Jonbbrew Member

    Not coming up on search for me. Is 1815 the correct number?
     
  8. Lewissa81

    Lewissa81 New Member

    No issues. Those don't work for the amp and oil lights though.
     
  9. Lewissa81

    Lewissa81 New Member

    Try 85805
     
  10. Lewissa81

    Lewissa81 New Member

  11. Jw60

    Jw60 That guy 2024 Sponsor 2023 Sponsor 2022 Sponsor

    The trim ring is just folded over the housing in 4 places. Undo two adjacent folds and it comes off. With the bezelnoff the housing you can unscrew the mechanism from the housing and see which bulbs are shrouded for indicators and which are for back lighting.
     
    Beach66Bum, baldjosh and Jonbbrew like this.
  12. Jonbbrew

    Jonbbrew Member

    Thanks. Is the bulb 1895?
     
  13. baldjosh

    baldjosh Member

    beat me to it...between the 4 mounting holes, on the back side are the 4 tabs. you should have little cardboard tubes that keep the light on each gauge or indicator...i believe one bulb lights the speedo, though i think its pretty anemic.
     
    Beach66Bum likes this.
  14. Lewissa81

    Lewissa81 New Member

    No the package has 1815 in big lettering and 85805 in small lettering. ‍♂️
     
  15. Jonbbrew

    Jonbbrew Member

    So what bulb is needed?
     
  16. Lewissa81

    Lewissa81 New Member

    I think it's a 53
     
  17. boopiejones

    boopiejones I can’t drive 55

    I have a moth in my speedo too. I was wondering how it got there... but after seeing you also have a moth, maybe they were original equipment?
    BF4856B0-31BA-4E5D-913F-D45F86B26C19.jpeg



     
    tom h, Beach66Bum, Jonbbrew and 3 others like this.
  18. Jonbbrew

    Jonbbrew Member

    Haha! :rofl::rofl::rofl::rofl:
     
  19. boopiejones

    boopiejones I can’t drive 55

    It’s not a bug, it’s a feature!
     
  20. Jonbbrew

    Jonbbrew Member

    9F66AFA6-9518-48B7-B317-D86913308D79.jpeg Is there a replacement glass gasket offered?mine is brittle and cracked in one place...so far.