1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Single To Split Windshield Conversion

Discussion in 'Early CJ5 and CJ6 Tech' started by adams77, Jan 1, 2018.

  1. adams77

    adams77 Member

    My single windshield is smashed, I want to install the split style.

    Is it as easy as I think or are the frames different from single to split style?

    I searched but could not find info on the frames.
     
    adams77, Jan 1, 2018
    #1
  2. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    'Split" as in the military M38a1 version, or split as in the fold out ventilating windshield?

    If military then the same frame, just a rubber strip down the middle between the two pieces of glass. No real advantage to this.

    If ventilating then the outer frame is the same piece but you'll need to source the inner frame, hinges, arms & latches- easier to find the completes setup, which is neither easy or cheap.
     
    Howard Eisenhauer, Jan 1, 2018
    #2
    GeoffreyL likes this.
  3. adams77

    adams77 Member

    split non ventilating
     
    adams77, Jan 1, 2018
    #3
  4. Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    EasyPeasey.
     
    Howard Eisenhauer, Jan 1, 2018
    #4
  5. Keys5a

    Keys5a Sponsor

    Source an M38A-1 military gasket with the bonded center divider as part of the gasket. I've found these a bit more difficult to install the glass in due to the square corners.

    Edit: I just saw the photo with your name, and its a flat-fender. The info above applies to a CJ5/6.
    The flat-fender Jeeps use different windshield frames depending on the model. 2A had a square corner/two-piece glass, and the 3A and 3B used a 1 piece glass with round corners. No real options with original type windshield gaskets. The CJ5/6/M38A-1 use a wider windshield than the flat fender models.
    -Donny
     
    Last edited: Jan 1, 2018
    Keys5a, Jan 1, 2018
    #5
  6. adams77

    adams77 Member

    Great, thanks for the confirmation.

    Now to source the glass and rubber...
     
    adams77, Jan 1, 2018
    #6
  7. adams77

    adams77 Member

    Other jeep, I am working on a ‘60 cj5
     
    adams77, Jan 1, 2018
    #7
  8. Daryl

    Daryl Sponsor

    You will most likely pay more for two pieces of glass then for one. The split window gasket costs quite a bit more then a roll of standard gasket.
     
    Daryl, Jan 1, 2018
    #8
  9. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    And the single glass is much safer. No blind spot due to the gasket in the middle of your field of view.
     
    timgr, Jan 1, 2018
    #9
  10. jeep2003

    jeep2003 Well-Known Member

    I welded a strip of flat stock down the center of mine and used standard gasket material whatever the glass shop provided.
     
    jeep2003, Jan 2, 2018
    #10