1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Fender Well Mod For Seat Room

Discussion in 'Early CJ5 and CJ6 Tech' started by mickeykelley, Apr 5, 2016.

Page 2 of 2
  1. 47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    I got the jeep hunch real bad. fixed it by never having a top on. Problem solved
     
    47v6, Apr 6, 2016
    #21
    Ric-san and Greenshirt82 like this.
  2. Beach66Bum

    Beach66Bum 1966 Tuxedo Park Mark IV 2024 Sponsor

    but the jeep hunch is kinda 'gansta...:cool:
     
    Beach66Bum, Apr 6, 2016
    #22
    47v6 likes this.
  3. Danefraz

    Danefraz Well-Known Member 2023 Sponsor 2022 Sponsor

    and with the "jeep wave" it's all like flashing signs and stuff...
     
    Danefraz, Apr 7, 2016
    #23
    Twin2, Beach66Bum and 47v6 like this.
  4. jeep2003

    jeep2003 Well-Known Member

    take the sat tracks out and lower the seat as much as possible. it helps alot. or just get a later model winshield with the wipers on bottom
     
    jeep2003, Apr 7, 2016
    #24
  5. 69Willys

    69Willys Las Vegas, NV

    "Fluffy" :D good, safe adjective(y)
     
    69Willys, Apr 7, 2016
    #25
  6. Rick Whitson

    Rick Whitson Detroit Area 2024 Sponsor 2022 Sponsor

    I thought that would get some sort of a reply, Thanks, that is a safe description, I got from her.
     
    Rick Whitson, Apr 8, 2016
    #26
    Beach66Bum likes this.
  7. Glenn

    Glenn Kinda grumpy old man Staff Member

    If it's approved by her you are good to go. ;)
     
    Glenn, Apr 8, 2016
    #27
  8. Seth Stevenson Wells

    Seth Stevenson Wells New Member

    Are there any specific diagrams for the cuts to the fender well? I see we can move them 3-4'' back, but was just looking for the layout location of the cuts. I see the pictures in the beginning of this post but can't make out any dimension. Thanks in advance.
     
    Seth Stevenson Wells, Jun 20, 2016
    #28
  9. Seth Stevenson Wells

    Seth Stevenson Wells New Member

    Seth Stevenson Wells, Jun 20, 2016
    #29
  10. RATTYFLATTY

    RATTYFLATTY I think you need a little more throttle

    Have you considered modding the floor and steering box mount slightly as to tip you wheel forward slightly? Or shrinking the steering wheel diameter?
     
    RATTYFLATTY, Jun 20, 2016
    #30
  11. Daryl

    Daryl Sponsor

    Or just go to a auto trans and all the legroom needed to push on the clutch goes away.
     
    Daryl, Jun 20, 2016
    #31
  12. Seth Stevenson Wells

    Seth Stevenson Wells New Member

    I kinda like the big Ol steering wheel! Actually I love it. But I am wondering about the new seat frame that will be required with this and it's location.
     
    Seth Stevenson Wells, Jun 21, 2016
    #32
Page 2 of 2