• Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.

Cyj5/7 rustoration

Fleur_de_lis_82

New Member
Joined
Dec 17, 2019
This is a long convoluted headache that has gone above & beyond the usual Jeep thing of going sideways. Repeatedly and often.

Round about 2 years back a buddy who's been instrumental in feeding the Jeep bug of mine (it's gone both ways, a lot), gifted me a Cj7 frame & Yj tub. Basically it was taking up space & he wanted it gone & I'm a pack rat & was Jeepless at the time.
1000001132.jpg

1000010171.jpg

Few months later we did a trade for an 82 Cj7 he had. I'm 82 vintage myself, which was the only real reason for wanting it. This was kind of a mistake in the long run, because ya know, Jeep things.
1000001284.jpg

So time comes for me to make the 10 hour trip (each way) to pick him up and life went full retard. The mother in law had a massive stroke & was on hospice here for a while before passing. Since the wife was her only local relative, guess who got to deal with all that mess & it's expense (cause someone refused to make final plans). Then right after that all was delt with, the wife breaks her ankle in 3 places and insurance decided to cover nothing. Because they suck & are now a former insurance company.

So needless to say, that killed the bank account. It's still screwed up more than a year later. But anyway, no trip to pick up el jeepo. But my buddy came for a visit during the madness & I sent the car hauler back with him & he got everything loaded up.
1000002292.jpg

Last March the wife & I were finally able to make the drive to Eastern Kentucky to drag him home.

Because of course you drive an almost 50 year old truck a thousand miles to drag home a only slightly newer basket case of a Jeep.
1000005034.jpg

The trip went great until about 2 hours from home & the fuel pump went out. Which was a pain, since no one had a replacement in stock. But a cheap electric pump, a boat tank & 15 foot of rubber fuel line and we made it home.
1000005063.jpg

And since nobody had a clue if said jeep would even run, I had to try. Boat tank & a GM hei module for the win. And a random 2 barrel from a Mopar 318.
1000005130.jpg

1000005131.jpg



Will continue this. It gets a lot more stupid, I've still got the last 7 months to cover.
 
I knew that the frame under the 82 was junk, as most later Cj frames tend to be. So the brilliant plan was to use that free frame, which I had unfortunately never really looked at very closely.

Rust buster on both sides. 1000005098.jpg

1000005115.jpg

1000005115.jpg

I truly despise the rust buster repair, it's essentially putting a bandaid over a bullet wound. And take it from a guy who has been shoot.... twice, the bandaid doesn't fix anything.
1000006678.jpg

1000006679.jpg

1000006680.jpg

Did me some layout and got choppy choppy turning those stupid patches into a better repair. I was a fabricator once upon a time in life h enjoy this kinda thing.
1000006797.jpg

1000006800.jpg

1000006810.jpg

1000007987.jpg
 
With some careful cutting, the inside was done as well.
1000007990.jpg

Right about that point I traded a perfectly good truck for two parts Jeeps, because I'm a parts whore.

If it fits it ships.
1000007768.jpg

Apparently you can fit a Cj5 in the back of a 79 Ford truck. Who knew.
1000007760.jpg

And the main reason I wanted this junk. A low mileage rebuilt 304 thats a little on the spicy side supposedly.
1000007757.jpg

1000007767.jpg

1000007896.jpg

This Cj had one heck of an accident.
1000007898.jpg

And its a runner.
 
I'll spare the details of fixing the rest of the frame, more of the same. Cut & weld.

Got new lift springs in. Went with a 4" BDS kit.
1000008311.jpg

1000008312.jpg

Outside and on some 33x12.50x15 rollers.
1000008322.jpg

1000008323.jpg

Started busting down the Cj in preparation of getting the frame swapped and it all went to crap.
1000008266.jpg

Off came the stupid aluminum rust enhancers, and so did the structural bondo behind it as well.
1000008270.jpg

1000008272.jpg

But wait, it gets worse!!!

Someone at sometime did the wrong thing the wrong way. They cover essentially the entire floor with patch panels, self tappers & a rubberized water retention system.
1000008267.jpg

1000008268.jpg

1000008271.jpg
 
Basically, that tub is toast without a lot more time, effort and monies than I cared to invest. So the bright idea became to use that white Yj tub.

And check out how bent this poor frame was.
1000008450.jpg

And the 304 going in.
1000008471.jpg

Yj tub going on.
1000008479.jpg

1000008480.jpg

1000008482.jpg

1000008517.jpg

Pulled it back off to do some clean up on the firewall & the wife went after some rust with the wire cup. Needed all the body mount locations repaired.
1000008552.jpg

1000008916.jpg

And then things changed again. Got a really good deal on another almost minty Yj tub.
1000009607.jpg
 
get some ppe for yourself or someone will get hurt. wire cup barefoot in shorts no face shield?

If you could let me know how to accomplish that, I'll happily listen. It's been an ongoing argument for many years now.


The woman hates shoes, goes around barefoot in the snow.
 
If you could let me know how to accomplish that, I'll happily listen. It's been an ongoing argument for many years now.


The woman hates shoes, goes around barefoot in the snow.
Glasses at least. Those metal needles will penetrate an eye pretty easily when they come flying off.

I don’t see shorts as an issue, been doing the same for years…no shoes…that’s a new one.
 
Glasses at least. Those metal needles will penetrate an eye pretty easily when they come flying off.

I don’t see shorts as an issue, been doing the same for years…no shoes…that’s a new one.
when you need to yard one of those wires out of a shin or the top of a foot she may think differently.
 
So the white Yj tub is out & frankly, I'm not complaining. I'll fix more than most people will, but I'm always pressed for time & that would've taken a while.

I found myself in need of a rear crossmember & instead of buying one, I was convinced to make one. Got on of those shop press finger brake tools from Amazon & proceeded to get with it.

Took some measurements and hacked out a piece of 14ga. And looky, gloves, a face shield & hearing protection.....
1000009260.jpg

Some quickie layout & choppy chop. Bendy bend. Then glue it all back together and clean it up.
1000009287.jpg

1000009288.jpg

1000009297.jpg

1000009303.jpg

Oh wow! It fits.
1000009307.jpg

And the choice for an exhaust. Because I obviously never wanna be able to hear the radio.
1000009313.jpg

We're actually pretty fond of the Purple Hornies & have them on almost everything.

On to brakes & fuel. AKA, stop & go. I elected to not buy pre-made hard lines & instead bought a tubing straightener and tubing. Wish I had gotten one of these things years ago, straightened a 12 foot section of 3/8" steel line in just a few minutes, let alone the 3/16" brake lines.
1000009494.jpg

1000009876.jpg

New proportioning valve as well, & all that mess going in too.
1000010161.jpg
 
Engine, transmission & T-case in for the hopefully the final time. Talked about the transmission headache elsewhere.
1000010165.jpg

1000010247.jpg

And drive shaft headaches. Due to the lift, the factory shaft was to shortcut it fast so happens that the front shaft from a 79 Bronco is perfect, or a few inches longer. Just needed to get some combination u-joints. 1310 to 1330.
1000009880.jpg

And that brings things up to more or less current. Got the bady set back on & most of the body mounts in.
1000009624.jpg

Will be starting in on the interior oner the weekend. Roll bar & wiring.

I wanna get it done so I can get cracking on the wife's 67 Waggy.
 
One expensive radiator hose.
1000010515.jpg

Mucho time saved. Turn the Cj tank 180° & use the stock Yj filler location.
1000010513.jpg

1000010514.jpg

And the homemade crossmember attaches to the tub. Didn't weld the brackets to the frame yet, didn't wanna drag the welder out due to incoming rain.
1000010508.jpg

Decided to get a start on doing the dash & defroster. I cut out the defroster holes out of the yellow tub but changed my mind. This is gonna a hybrid Cj / Yj thing. Mostly Cj but I'm gonna keep the Yj defrost duct & speaker grills. Going to cut in the Yj duct & make a defuser.
1000010507.jpg

1000010511.jpg

1000010512.jpg

Swapped windshield frames too & got the hold down bolts moved as well.
1000010516.jpg

1000010509.jpg

1000010510.jpg
 
Didn't do much today, haven't been feeling particularly good the lat few days.

Got my bumper brackets welded on & the bumper on.
1000010561.jpg

With it's bright lights. I'll have to wire these in on a toggle or something.
1000010560.jpg

Had to change out the grille. A bunch of the sheet metal around the radiator was broken. Got the radiator in & a front bumper on.
1000010554.jpg

1000010553.jpg

1000010559.jpg

Cleaned up my favorite 2bbl Holley and got it on & some of rhe engine harness.
1000010558.jpg

Fixed the worn clutch fiddly bits.
1000010551.jpg

1000010552.jpg

1000010556.jpg

Wanted to see what the led lights would look like with the rock grille on.
1000010555.jpg
 
Back
Top Bottom