• Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.

T15 to Buick 225 v6 1968

W

Willys_Addict

New Member
Joined
Aug 4, 2026
What’s all needed adapter or bellhousing wise to mate a T15 to a Buick 225 odd fire? Current bellhousing is the 2 piece style (1968). Been doing some research but confused a bit still. Any help? Thanks
 
Second post -
This topic has been covered quite a bit in the past.
Use your favorite search engine to look through the archive of old posts.

The easiest route would be an adapter from Novak or Advance Adapters.
AFAIK there is no direct junkyard solution to bolting up the T-15 to the Dauntless.
Input shaft length is the central incompatibility.
The T-14 and T-15 have the same front pattern, but there's no T-15 match to the Dauntless T-14 input shaft length.
Novak supplies (supplied?) a thinner adapter to replace the factory adapter used with the Jeep/Buick Dauntless bellhousing and a T-86 or T-14.
This adapter expects a T-15 from a '72-75 V8 CJ.
 
Last edited:
timgr said:
Second post -
This topic has been covered quite a bit in the past.
Use your favorite search engine to look through the archive of old posts.

The easiest route would be an adapter from Novak or Advance Adapters.
AFAIK there is no direct junkyard solution to bolting up the T-15 to the Dauntless.
Input shaft length is the central incompatibility.
The T-14 and T-15 have the same front pattern, but there's no T-15 match to the Dauntless T-14 input shaft length.
Novak supplies (supplied?) a thinner adapter to replace the factory adapter used with the Jeep/Buick Dauntless bellhousing and a T-86 or T-14.
This adapter expects a T-15 from a '72-75 V8 CJ.
Click to expand...
Yes, I did use the search function and even google search. Like I said, just wanted to get a straight clear answer…
 
You are complaining that someone gave you a clear answer?
"Been doing some research" could be anything.
 
You must log in or register to reply here.
Back
Top Bottom