• Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
ITLKSEZ

ITLKSEZ

Watching a toddler play w/a loaded gun 50 From Veradale, WA
Joined
Messages
7,046
Reaction score
18,840
Points
113

Latest activity Postings Albums About

    • ITLKSEZ
      ITLKSEZ reacted to hudsonhawk's post in the thread Wife's new whip with Like Like.
      After 18 years my wife finally said goodbye to her beloved Solara SLE Convertible. Her requirements were only that the replacement had...
    • ITLKSEZ
      ITLKSEZ replied to the thread Varg In Jeep's Clothing.
      Blessed are those with a high hood. ;) Look at all that room! In a word, yes. I might still make a dedicated ground post eventually.
    • ITLKSEZ
      ITLKSEZ reacted to duffer's post in the thread Varg In Jeep's Clothing with Like Like.
      I sort of did something similar on my B except it's under the hood and uses Miller welding cable jacks-the receptacles to the left of...
    • ITLKSEZ
      ITLKSEZ reacted to neohic's post in the thread 1975 Brutally Simple Daily Driver with Like Like.
      The upper mount will be more creative. I started with a piece of steel something-er-other that I nearly ran over on the road years ago...
    • ITLKSEZ
      ITLKSEZ reacted to Jw60's post in the thread F-Head question with Haha Haha.
      I might have posted this with a beer in hand and not have seen the extent of the glitter. :beer:
    • ITLKSEZ
      ITLKSEZ replied to the thread Varg In Jeep's Clothing.
      It’s a tight fit. It collapses when pulled off from the vacuum. I always have electrical tape with me if needed.
    • ITLKSEZ
      ITLKSEZ reacted to SoCalNickG's post in the thread Varg In Jeep's Clothing with Like Like.
      I love the cap. How loose fitting is the cap? Maybe pack an extra cap or two in case of loss on the trail?
    • ITLKSEZ
      ITLKSEZ reacted to 47v6's post in the thread F-Head question with Like Like.
      I agree with the naysayers about this bearing. I also think you should put back together, torque it to the correct spec and run it until...
    • ITLKSEZ
      ITLKSEZ reacted to neohic's post in the thread Varg In Jeep's Clothing with Like Like.
      Neato!
    • ITLKSEZ
      ITLKSEZ replied to the thread Varg In Jeep's Clothing.
      I just did one of those mods that nobody may ever figure out what it’s for, but it’ll make certain tasks a lot easier. I took a...
    • ITLKSEZ
      ITLKSEZ reacted to neohic's post in the thread 1975 Brutally Simple Daily Driver with Like Like.
      My springs arrived! I went with a Zone Offroad 2” YJ kit without shocks. Reason being is that Zone is under the Fox/BDS umbrella and...
    • ITLKSEZ
      ITLKSEZ reacted to Keys5a's post in the thread F-Head question with Like Like.
      I have to disagree with the condition of that bearing. Yes, its great to see a “standard” size in there, meaning the crankshaft has...
    • ITLKSEZ
      ITLKSEZ reacted to Fireball's post in the thread 1963 Us Navy Dj-3a with Like Like.
      Here's Another thing I'm trowing in the tool kit. Les Schwab put really long valve stems in the wheels when I had them mount the tires...
    • ITLKSEZ
      ITLKSEZ replied to the thread 1963 Us Navy Dj-3a.
      And to seat stubborn tire beads!
    • ITLKSEZ
      ITLKSEZ reacted to wheelie's post in the thread Langmuir Crossfire XR Plasma table with Like Like.
      Geez. And I’ve been mulling over whether or not I can figure out a Crickut stencil cutter machine thing. Been a while since we’ve...
    Show older items
  • Loading…
  • Loading…
  • Loading…
Back
Top Bottom