• Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
Norcal69

Norcal69

2022 Sponsor 2023 Sponsor 2024 Sponsor 2025 Sponsor 2026 Sponsor
The Best Stranger on the Internet 38 From Northern California
Joined
Last seen
Viewing forum list
Messages
4,342
Media
8
Reaction score
14,589
Points
113

Latest activity Postings Media Albums About

    • Norcal69
      Norcal69 reacted to bigjohn's post in the thread 1970 Torino And Fairlane Builds with Like Like.
      Well here’s where we’re at. The 140 mile drive up in the 90 degree went great on Thursday. The car worked perfectly and the temp stayed...
    • Norcal69
      Norcal69 reacted to bigjohn's post in the thread 1970 Torino And Fairlane Builds with Like Like.
      Thanks Roy! If I’m right the 8.73 should be mid 13’s which I’m happy with. More cam will certainly yield significantly more power, but...
    • Norcal69
      Norcal69 replied to the thread Herms 30% OD unit I'm at my wits end..
      I had the same problem with one of his 30% OD units about 9 years ago. It would not stay in direct and I was forced to drive in OD all...
    • Norcal69
      Norcal69 reacted to tymbom's post in the thread Seabee M38A1 Build with Like Like.
      The post Rubicon madness has finally settled down I think. On my way home from the trip I dropped off my dad at this house. As I went to...
    • Norcal69
      Norcal69 reacted to Fireball's post in the thread 71 Wheeling Rig with Like Like.
      Hah! Now that you have CJs 5, 6, and 7 you're obligated to get a 2, a 3, and an 8 to round the collection out. You're halfway there...
    • Norcal69
      Norcal69 replied to the thread 71 Wheeling Rig.
      I’m not one to talk…. I drug home a really clean 1980 cj7 304/4spd a couple weeks before the Rubicon. Between jeeps I own and jeeps...
    • Norcal69
      Norcal69 reacted to Fireball's post in the thread 71 Wheeling Rig with Like Like.
      Too many Jeeps!
    • Norcal69
      Norcal69 replied to the thread 71 Wheeling Rig.
      My bad. Its hard to keep all of your jeeps straight. I was thinking this was the flattie.
    • Norcal69
      Norcal69 reacted to Fireball's post in the thread 71 Wheeling Rig with Like Like.
      This on is NOT a Rubicon rig. I did use the doughnut style mount on the actual Rubicon rig DJ3. I sank the mount into the crossframe...
    • Norcal69
      Norcal69 replied to the thread 71 Wheeling Rig.
      Since this is a Rubicon rig, it's time to integrate the torque mount into the cross member. Couple design ideas.
    • Norcal69
      Norcal69 reacted to bigjohn's post in the thread 1970 Torino And Fairlane Builds with Like Like.
      A quick update here: I changed the center section and axles again. Even after adding Ford racing friction modifier and a ton of driving...
    • Norcal69
      Norcal69 replied to the thread I've Got It Bad........ I Bought A 1975 Cj6!.
      I had no plans of diving into the engine...... . After talking with my buddy who owns the shop where I built the 383 for my Tahoe; I...
    • Norcal69
      Norcal69 reacted to 707Jeeper's post in the thread Avocado 71 with Like Like.
      Made a few changes to the Jeep today. Headed back to the Rubicon with my nephew in his Samurai and brother law in his CJ3A Mid...
    • Norcal69
      Norcal69 reacted to bigjohn's post in the thread 1970 Torino And Fairlane Builds with Like Like.
      I got a few things dialed in the last few days. Yesterday I found the original axle shaft from this axle in the barn attic, and...
    • Norcal69
      Norcal69 replied to the thread I've Got It Bad........ I Bought A 1975 Cj6!.
      The last of the differential parts should be in this week and then the axles can be dropped off to get built. I traded an old forklift...
    Show older items
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top Bottom