timsresort
Latest activity Postings Media Albums About
-
-
timsresort reacted to Dana44's post in the thread Best approach to lowering gear ratio on a dana 44 (3.75) for wheeling. with
Like.
Thanks for that information. I knew it just couldn't be that easy. And because a picture is worth a thousand words. A cool jeep... -
My welding table covers a bunch of bases: tool storage, air circulation, power… everything in my shop is on wheels and does multiple...
-
timsresort replied to the thread Welding Table vs. A Table To Weld On.I made a moveable 72" x36" table. I too am working in and out of (usually) my side of a 2 car garage. You guys have probably seen this...
-
This! I ended up cutting my mount off and pushing my box further forward. Pitman arm still kisses the cross over steering at full stuff...
-
If you are in the right spot, you will need to notch the bottom of the grill to clear the pressure hose. This is where I located the box...
-
Thank you, Gentlemen. I will heed your warnings and trust your experience/expertise. So it sounds like my best best is to move the box...
-
timsresort replied to the thread Holy Guacamole!.Here's another way, bend and flare your own lines. This box placement works with a 6.5" pitman with a 1" drop, on a stock-ish CJ5 with...
-
timsresort replied to the thread Holy Guacamole!.Is your pitman/drag link going to be far enough forward?
-
timsresort reacted to blalp!'s post in the thread The Slow Evolution Of Givemethewillys' Jeep with Like.
Looking good, @givemethewillys ! The Regal manifold looks like it should clear the brake master nicely and seemed like it would clear...
-
timsresort reacted to givemethewillys's post in the thread The Slow Evolution Of Givemethewillys' Jeep with Like.
I took a few minutes before work this morning to complete a small project that I've been putting off for forever, mostly out of...
-
timsresort reacted to givemethewillys's post in the thread The Slow Evolution Of Givemethewillys' Jeep with Like.
Dude this is great advice, Thank you!
-
After spending about a hour checking steering angles and clearance, I drained the coolant, and removed the grille for crossmember...
-
timsresort replied to the thread The Slow Evolution Of Givemethewillys' Jeep.If you have a hydraulic shop around, I would recommend having them crimp them. And don't have the kid at FLAPS do it, ask me how I know...
-
timsresort reacted to givemethewillys's post in the thread The Slow Evolution Of Givemethewillys' Jeep with Like.
I did! I wasn't sure if i'd need it as far as rigidity is concerned, but since i had the steel and the cut pattern ready, i figured why...
-
timsresort reacted to givemethewillys's post in the thread The Slow Evolution Of Givemethewillys' Jeep with Like.
Despite my earlier success with a CNC plasma cutter, I didn't have any thicker plate on hand, so my next step was to buy Advance...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…