FinoCJ
Latest activity Postings Media Albums About
-
-
FinoCJ replied to the thread New Ring and Pinion setup.You might check with @jbjeeps near Ashton, ID. He might have a shop recommendation for you. I've done a couple RandP set ups now....I... -
I think you’re fine. The tube itself if offering an immense amount of strength. Add to that a circumferential weld will make it bullet...
-
Also note that you can get most parts to fix these trailers: https://www.debellajeepparts.com/TRAILER WWII.htm...
-
FinoCJ replied to the thread Fino's 1970 Cj5 Build Thread.So the round tubing is 1/8 wall....it makes me a bit nervous.....you still good knowing it's 1/8 and not 3/16 (it's what I could get)...
-
FinoCJ replied to the thread Fino's 1970 Cj5 Build Thread.yup....I am still figuring out the details of this, but I do want to add some strength connecting across under the bottom of the tubing
-
X2, May be just what he has on hand, but does look kinda thin. If a little thicker tubing could be had I would agree it might be...
-
James is that round piece of metal going to be strong enough to support the crossmember. On the computer it seems pretty thin?
-
FinoCJ replied to the thread Fino's 1970 Cj5 Build Thread.Not that I see - just ugly factory or PO welds. Some pieces of welding wire stuck in there and gaps etc. The mount still has OEM style...
-
FinoCJ replied to the thread Fino's 1970 Cj5 Build Thread.Guess it's ready to weld ...
-
FinoCJ replied to the thread 1975 Brutally Simple Daily Driver.Much like my 2nd gen tacoma - which is probably a bit heavier than your MJ, but similar brakes after your upgrade - its not ideal, but...
-
FinoCJ replied to the thread Fino's 1970 Cj5 Build Thread.This piece is a pita to get off: This looks promising....now if only I could just not weld it:
-
FinoCJ replied to the thread 1975 Brutally Simple Daily Driver.I towed many miles (1000s) with my CJ behind my Tacoma on a tow bar.....it worked fine.
-
FinoCJ reacted to Militarymetal's post in the thread Need a source (electric fan switch) FOUND ONE with
Like.
Thank you, thank you, thank you! After trying 4 different thermal switches from auto suppliers, I used the switch that Rich M suggested... -
FinoCJ replied to the thread Fino's 1970 Cj5 Build Thread.this is interesting...I can push my marginal bracket fabrication skills to the max and see if I could figure out some sort of mount off...
-
And another option: https://www.speedwaymotors.com/Firewall-Mount-Flanged-Bearing-for-Steering-Shaft,2044.html
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…