1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

yes another dash layout... 68-69'

Discussion in 'Early Jeep Restoration and Research' started by Evans, Dec 9, 2005.

  1. Dec 9, 2005
    Evans

    Evans Former YJ owner

    Dallastown , Pa
    Joined:
    Oct 28, 2005
    Messages:
    128
    Painted my dash I got from jcandhis63.... now I need what went in the holes that I have..... I know the upper far left is for WW wiring and the one just left of the speedo is ignition , but I have no idea about the 5 in a row on the left.... what went in each hole ???
     
  2. Dec 9, 2005
    speedbuggy

    speedbuggy Looking for a Jeep now

    Living the Good...
    Joined:
    Jul 1, 2004
    Messages:
    1,270
    Wow! You're farther along than I am. My new dash and grille are still at the sand blaster :rofl:

    Looks good ;)
     
  3. Dec 9, 2005
    Evans

    Evans Former YJ owner

    Dallastown , Pa
    Joined:
    Oct 28, 2005
    Messages:
    128
    This dash was so clean !! and only had some surface rust on it , all I had to to do was go over it with a wire wheel and smooth the whole this with some fine sandpaper and my rattlecan color was easy enough to apply !!
     
  4. Dec 9, 2005
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,102
    Seek and Ye Shall Find-


    H.
     
  5. Dec 9, 2005
    Evans

    Evans Former YJ owner

    Dallastown , Pa
    Joined:
    Oct 28, 2005
    Messages:
    128
    Thank you !!! Thats great !!
     
  6. Dec 9, 2005
    Hippo393

    Hippo393 Jeepless

    Charlotte, NC
    Joined:
    Sep 22, 2002
    Messages:
    1,130
    Wow, that is neat. :shock:

    My dash layout is more like 3, 5, 1, 7, 10, 2, 11, 9, 6, 4, 8. :oops:
     
  7. Dec 10, 2005
    jcandhis63

    jcandhis63 Member

    Hillsboro, TX
    Joined:
    Feb 6, 2005
    Messages:
    87
    Evans,

    You made that dash look good. Did you fix the glove box door or put a different one on it?

    I left the dented door on it because I didn't want to to try to fix it. Now I am talking to Hippo about buying one from him.

    Its good to see that dash painted and ready to install instead of lying in my pile of treasures.

    JC
     
  8. Dec 10, 2005
    Evans

    Evans Former YJ owner

    Dallastown , Pa
    Joined:
    Oct 28, 2005
    Messages:
    128
    Same door Jim , popped the dent out ... the wavieness doesn't show up as bad with the flat paint. Even fixed the glovebox latch , took about 2 days of PB Blaster and WD 40 till it loosened up....
     
New Posts