1. Tip...
    When posting in Classifieds, you can choose from the following menu prefixes in the Thread Title: For Sale, WTB or Free.
    Click on the X to dismiss this notice.
    Dismiss Notice
  2. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

WTB Wtb Dana 44 Lsd/locker

Discussion in 'Early CJ-5 and CJ-6 Classifieds' started by masscj2a, Apr 29, 2019.

  1. Apr 29, 2019
    masscj2a

    masscj2a Member Sponsor 2019 Sponsor

    Chester Mass
    Joined:
    Dec 27, 2013
    Messages:
    393
    I have a rear flanged narrow track offset 30 spline Dana 44. I'm looking for a LSD or locker for it. Let me know what you have kicking around. 393 ratio and up please. But if you have a 373 and below, for now that would work also. But going to 456 or 488 eventually.

    I should have mentioned, I do not like the clicking of lunch box lockers. It drives me nuts hearing all the clicking. I am always listening for something to break anyways.

    Also looking for a LSD/locker for a narrow track Dana 30 front axle. Thanks again for looking.
     
    Last edited: Apr 30, 2019
  2. Apr 29, 2019
    TIm E

    TIm E Member Sponsor 2019 Sponsor

    NW Arkansas
    Joined:
    Mar 2, 2017
    Messages:
    590
    I have a Trac Lok from a flanged 44 NT in good condition with a nice tight clutch pack. It had a 4.88 ring gear, but I switched to an open diff to install a Lock Right, so no ring gear included. PM me if interested.
     
  3. Apr 29, 2019
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member Sponsor

    Denver, CO
    Joined:
    Jul 18, 2013
    Messages:
    2,113
    Tim beat me to it! I have the exact same thing. Tim gets first dibs as he has been so helpful getting mine switched out.
     
  4. Apr 29, 2019
    sgogpn

    sgogpn Member Sponsor 2019 Sponsor

    Glendale, AZ.
    Joined:
    Nov 20, 2002
    Messages:
    310
    I have a used lockrite for 30 spline Dana 44 that I bought off of Craigslist a few years ago that Ive never used. I got it from a guy who had put it in the front of a truck and then took it back out to go to a selectable. I'd take $200 for it shipped.

    Mike

    Now that I think about it, I have a NIB Aussie locker for a Dana 30 somewhere. Ill dig it up if you're interested...
     
  5. Apr 29, 2019
    oldtime

    oldtime oldtime

    St. Charles,...
    Joined:
    Aug 14, 2006
    Messages:
    2,646
    I have a D44 30 spline series IV Trac Loc too.
    Mine comes with "all the internal" parts required to fully rebuild it.
    The parts are genuine OEM Dana Spicer.

    If you want 30 spline Powr Lok they are typically found in 1960/1970 IH axles and some GM pickups.
     
  6. Apr 30, 2019
    masscj2a

    masscj2a Member Sponsor 2019 Sponsor

    Chester Mass
    Joined:
    Dec 27, 2013
    Messages:
    393
    Tim, pmed you. Thanks all.
    Also could use one for 373 and lower for now. For the 44. Don't use lunch box lockers. I know they work, but clicking makes me think something is breaking.
     
  7. May 21, 2019
    B.J. Sparks

    B.J. Sparks New Member

    Thompson, PA
    Joined:
    Jan 30, 2018
    Messages:
    0
  8. May 21, 2019
    Keys5a

    Keys5a Sponsor Sponsor

    Joined:
    Jan 23, 2014
    Messages:
    2,096
  9. May 21, 2019
    masscj2a

    masscj2a Member Sponsor 2019 Sponsor

    Chester Mass
    Joined:
    Dec 27, 2013
    Messages:
    393
    Let me know. Should be 30 spline.
     
  10. May 22, 2019
    cj6/442

    cj6/442 Sponsor Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,678
  11. May 22, 2019
    Keys5a

    Keys5a Sponsor Sponsor

    Joined:
    Jan 23, 2014
    Messages:
    2,096
    I can't say I've ever seen the cross pin broken in 3 pieces!
    -Donny
     
    cj6/442 likes this.
  12. May 22, 2019
    jpflat2a

    jpflat2a what's that noise?

    Riverside CA
    Joined:
    Jul 30, 2003
    Messages:
    7,734
    ...then you've never seen the kid drive off road.......
     
  13. May 23, 2019
    cj6/442

    cj6/442 Sponsor Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,678
    :hellokitty:
     
  14. May 23, 2019
    cj6/442

    cj6/442 Sponsor Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,678
    I try,if you.re going to do something ,do it right
     
  15. May 24, 2019
    masscj2a

    masscj2a Member Sponsor 2019 Sponsor

    Chester Mass
    Joined:
    Dec 27, 2013
    Messages:
    393
    Thanks buddy, but I hate the clicking and clanking. Took the lemans out finally.
     
  16. May 24, 2019
    cj6/442

    cj6/442 Sponsor Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,678
    ouch ,you hurt me
     
  17. May 25, 2019
    B.J. Sparks

    B.J. Sparks New Member

    Thompson, PA
    Joined:
    Jan 30, 2018
    Messages:
    0
  18. May 26, 2019
    masscj2a

    masscj2a Member Sponsor 2019 Sponsor

    Chester Mass
    Joined:
    Dec 27, 2013
    Messages:
    393
    Sorry brother. But had to take her out for one last whirl.
     
  19. Jun 22, 2019
    Muzikp

    Muzikp Sponsor Sponsor

    Sacramento Ca.
    Joined:
    Sep 27, 2016
    Messages:
    858
    Still have the Aussie for a D30?
     
  20. Jun 22, 2019
    sgogpn

    sgogpn Member Sponsor 2019 Sponsor

    Glendale, AZ.
    Joined:
    Nov 20, 2002
    Messages:
    310
    Yep...PM me if you're interested.

    Mike
     
    Cowboyjeeper likes this.

Share This Page

New Posts