Very Concerned... Flywheel cracks

I pulled my old clutch off and pulled my flywheel also. On inspection i notuced that i did over heat the flywheel a touch probably from Tellico But what concerns me more than the little bit of blue is that i have some small cracks in the flywheel surface. If i resurface th eflywheel will this take out the cracks?? The flywheel was surfaced a while ago when i last had it apart, but i didnt have any cracks then. I had this flywheel balanced for my motor

So what should I do??

Not worry because the flywheel will resurface just fine??

Or get a mortgage now for shipping a heavy flywheel from somebody that has one??

Thanks!!!!

 

Just heat cracks prolly will machine out.no worries.....

 

wwwoooo... thanks Billy. I am going to take it out to the machine shop tomorrow. Didnt need this to be the end of me

Now i jsut have to figure out if my mrear main seal is leking, it looks like it maybe but it is hard to tell if the oil was from my tranny leaking from the input shaft.

 

Remember Animal had some small heat cracks before Tellico...........I just deglazed the flywheel and turned a blind eye...........

 

Cool i guess i had it cranked down too much like i thought in tellico. but my slave cylinder backet is now in the paint booth.. eerr sitting outside on a piece of newspaper drying from my rattle can spray job So ow i do not have to worry bout the clutch reacting to the body.

 

Great!!!!!!!!

I hate being under the bus...........

Hiding from the heat now myself..........

 

me too, inside and outside.

 

Did you check you PP????????

 

??????? I just checked Danny's... and he had a nice stink

 

pRESSURE PLATE...............kNOT HEAD!

 

hehehe.. i have a new one so i am not concerned with the old. look like one finger was a touch bent. the bottom wasnt bad, it looked like it heated and chattered (or however you explain it) since it looks like there was a mark that it was skipping on the metal.

 

Thats right.....I remember now................

Getting an estimate on a driveway..........Its too big for me to pour myself.......I figured 27 yards.

 

R) R) R) R) R) R) R) R) R) R)

 

Hi ya Patrick!!!!!!!!

How ya feelin?

 

WHAT??? Billy you arent going to do it yourself??? You are getting soft on us Billy

well... I guess it would really suck to pour that much concrete in the middle of a florida summer

 

I would but I need help!!!!!!

I can only count on maybe 2 people to come over..........27 yards is a big one man pour!

 

I can imagine. did you ever get a hold of the guy to get a model number and make of that AC??

 

Crap..........Give him a call tomorrow........I am still waiting for word on a used 2 ton for ya.......

 

oh man.. how much space dpoes that take up I was looking on the side of the garage today. There is room, and would be nice to only haveto cut out 2 1 foot holes . Is it all self contained?? My freind Mark (guy with TJ in Tellico) was over today and we were discussing it. Says it wont be hard, he has donw concrete work cutout liek that

 

2'x2'x3'...........split system......need an outside unit..........I am still werking it......unless you want a new one......I can prolly get a deal...........