1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Transfer Case Driveshaft Flanges

Discussion in 'Early CJ5 and CJ6 Tech' started by Alan F, May 14, 2016.

  1. May 14, 2016
    Alan F

    Alan F Sponsor

    SE TX
    Joined:
    Jun 16, 2015
    Messages:
    168
    Should the driveshaft flanges, on the front and rear of the transfer case, be phased or clocked the same way? Thanks!
     
    Alan F, May 14, 2016
    #1
  2. May 14, 2016
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,503
    Shouldn't matter since, when in 2WD, the rear will be turning and the front won't so, they would immediately be out of phase anyhow.
     
    wheelie, May 14, 2016
    #2
  3. May 14, 2016
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,420
    only drive shaft yokes
     
    Twin2, May 14, 2016
    #3
  4. May 15, 2016
    Alan F

    Alan F Sponsor

    SE TX
    Joined:
    Jun 16, 2015
    Messages:
    168
    Oh my gosh I feel stupid. I should have known that. D'uh! Thanks for the feedback.
     
    Alan F, May 15, 2016
    #4
    waynaferd likes this.
New Posts