1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Trans and V-6 Inquiry

Discussion in 'Early CJ5 and CJ6 Tech' started by heffleysmill, Nov 19, 2010.

  1. Nov 19, 2010
    heffleysmill

    heffleysmill 7 Slot Hotshot

    Columbus,TX
    Joined:
    Jun 4, 2010
    Messages:
    152
    I have A Tux Park with a factory 134 and the three speed Columb shift, I am wanting to install a 225 v-6 in this jeep. Will the bell housing off of the v-6 be in the way of the columb shift linkage and if not will I have a problem with the change over or should all bolt up with out any quams!
     
    heffleysmill, Nov 19, 2010
    #1
  2. Nov 19, 2010
    Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    cordele, Ga.
    Joined:
    Mar 29, 2007
    Messages:
    5,922
    Your column shift tranny is a T-90. It is not a direct bolt up to a 225. There have been many write-ups about installing 225's in place of the 4's and no it's not going to be a direct bolt-up. Others will elaborate on this.
     
    Walt Couch, Nov 19, 2010
    #2
  3. Nov 19, 2010
    Eaallred

    Eaallred Member

    West Valley City, UT
    Joined:
    Oct 9, 2008
    Messages:
    188
    My Buick V6 is mated to the T90 via an adapter and new bellhousing. It is not a direct swap.
     
    Eaallred, Nov 19, 2010
    #3
New Posts