1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Throwout bearing

Discussion in 'Early CJ5 and CJ6 Tech' started by Renegade ll, Nov 3, 2015.

  1. Nov 3, 2015
    Renegade ll

    Renegade ll Member

    Thayne Wyoming
    Joined:
    Feb 17, 2013
    Messages:
    781
    Looking for the correct part number for a throwout bearing for my 1971 cj5. It has the 225 dauntless V6 and a SM456 transmission. Thanks

    Julius
     
    Renegade ll, Nov 3, 2015
    #1
  2. Nov 3, 2015
    jzeber

    jzeber Well-Known Member 2022 Sponsor

    Morgan Hill, Ca
    Joined:
    Nov 15, 2003
    Messages:
    3,325
    As I recall there are quite a few that will fit. I ended up using the longest one I could find. I found a receipt for a Timken TMK-614037. Not sure it matters but I have a 231.
     
    jzeber, Nov 3, 2015
    #2
  3. Nov 3, 2015
    n6ifp

    n6ifp Member

    San Bruno/...
    Joined:
    Sep 15, 2004
    Messages:
    206
    I used the longest also, mine was a N1086
     
    n6ifp, Nov 3, 2015
    #3
  4. Nov 3, 2015
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,800
    47v6, Nov 3, 2015
    #4
  5. Nov 3, 2015
    Jamco6000

    Jamco6000 Member

    Baton Rouge, LA
    Joined:
    Apr 14, 2012
    Messages:
    211
    Jamco6000, Nov 3, 2015
    #5
  6. Nov 5, 2015
    Renegade ll

    Renegade ll Member

    Thayne Wyoming
    Joined:
    Feb 17, 2013
    Messages:
    781
    Thanks I went with the adjustable type from Novak.
     
    Renegade ll, Nov 5, 2015
    #6
New Posts