1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Throw out bearing help

Discussion in 'Early CJ5 and CJ6 Tech' started by PieLut, Jul 21, 2011.

  1. Jul 21, 2011
    PieLut

    PieLut Member

    Glendale, Arizona
    Joined:
    Jul 20, 2010
    Messages:
    464
    Just purchased a Sachs 10.5" clutch kit for my 66 CJ5 :v6:, T-18 1.125" diameter 10 spline shaft. The pilot bushing is correct, but the new throw out bearing is
    0.260" taller. The I.D. of the bearing is the same at 1.377" and the diameter where the clutch fork attaches to is also the same. Do I need to find a shorter throw out bearing? Thanks, Jonah

    [​IMG]
     
    PieLut, Jul 21, 2011
    #1
  2. Jul 21, 2011
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    The new one is the correct bearing for a stock Dauntless..
     
    Patrick, Jul 21, 2011
    #2
  3. Jul 21, 2011
    madgician

    madgician New Member

    Joined:
    Mar 29, 2007
    Messages:
    15
    the rollers come off, so you can use either of the carriers you want too.
     
    madgician, Jul 21, 2011
    #3
New Posts