1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Steering bell crank ?

Discussion in 'Early CJ5 and CJ6 Tech' started by Patrick, Oct 26, 2004.

  1. Oct 26, 2004
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    I got my rebuild kit today from Krage. It's the one I ordered, the 1 1/8" shaft. The shaft on my Jeep is only 7/8" where it clamps into the frame bracket, and the old shaft (I actually have 3 spares, too) has a sleeve thats 1 1/8" OD where the bearings ride. The 7/8" rebuild kits don't show this sleeve, only the 7/8" shaft. The new shaft is 1 1/8" the whole length, so it won't fit in the frame bracket. Does the 7/8" kit come with the 1 1/8" OD sleeve?

    Edit- the 7/8" kit does show the sleeve, part #920556, but it's listed for 4 cyl models......
     
  2. Oct 30, 2004
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,538
    Sounds like you got the wrong part. Spares are a good thing. I broke one out on the trail and was royally screwed.
     
  3. Oct 31, 2004
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Yup, it was the wrong one. It's on it's way back, and the proper one is coming. Oh, I got spares, like 3 or 4. Just none in great shape.........
     
New Posts