1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Speedometer Removal

Discussion in 'Jeepster Commando and Commando Tech' started by Jbleeds, Aug 19, 2018.

  1. Aug 19, 2018
    Jbleeds

    Jbleeds Member

    Lancaster, CA
    Joined:
    Dec 20, 2017
    Messages:
    65
    Can anyone tell me how to remove the speedometer housing? Do I unscrew the four screws or can I depress the clips held on by the screws. Not much room to work under the dash and I don't want to mess up the housing. Of course my next question would be how to remove the switch housing next to the speedometer housing!
     
    Jbleeds, Aug 19, 2018
    #1
  2. Aug 19, 2018
    Daryl

    Daryl Sponsor

    Bonney Lake, WA
    Joined:
    May 25, 2006
    Messages:
    2,881
    3/8" nut driver is usually the best way. Some used smaller nuts that take an 11/32" though.
     
    Daryl, Aug 19, 2018
    #2
  3. Aug 21, 2018
    commanlerwrangdo

    commanlerwrangdo Member

    Cleveland, Ohio
    Joined:
    Feb 10, 2014
    Messages:
    470
    On my Commandos I always just push on the clips to pop out the speedo or the switches housing. Speedo has 4 clips, switches housing has 2. Start with the hardest to get to one and finish with the easiest to get to.
     
    commanlerwrangdo, Aug 21, 2018
    #3
New Posts