1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Some headway on the 67, slow and steady!

Discussion in 'Builds and Fabricators Forum' started by IRQVET, Feb 25, 2015.

  1. Jul 16, 2016
    IRQVET

    IRQVET Bubbaification Exorcist

    Tallahassee, FL.
    Joined:
    Feb 5, 2015
    Messages:
    680
    I got the Jeep out of Sebastopol, how'd you know?
     
  2. Jul 16, 2016
    GraySkies

    GraySkies Always late, never finished...

    Western Washington
    Joined:
    Mar 25, 2012
    Messages:
    63
    Your very first post has a photobucket link, and the caption on the first photo says where you got it and how much. I spent a lot of time tooling around the Sebastopol area in our first Jeep, which was a '58 M38A1. We bought that as a running rig for $600 from an old guy out at Bodega Bay. Still visit every couple of years, since Mrs. GraySkies still has family there.
     
    IRQVET likes this.
  3. Oct 9, 2016
    IRQVET

    IRQVET Bubbaification Exorcist

    Tallahassee, FL.
    Joined:
    Feb 5, 2015
    Messages:
    680
    Still alive, Jeep is still in NorCal while I'm in Southern Oregon. I feeling the Jones and I wish it was up here w/ me, I have unfinished business with that rig . . .
     
  4. Oct 9, 2016
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,798
    Hope all is going well with your new job. The jeep will wait for you.
     
  5. Oct 12, 2016
    GraySkies

    GraySkies Always late, never finished...

    Western Washington
    Joined:
    Mar 25, 2012
    Messages:
    63
    Don't wait 20 years to get back to it like I did! Not recommended :(
     
    IRQVET likes this.
  6. Jan 14, 2017
    IRQVET

    IRQVET Bubbaification Exorcist

    Tallahassee, FL.
    Joined:
    Feb 5, 2015
    Messages:
    680
    I'm back! Just transported my rig from cousins field back into my garage up here in Oregon, stay tuned . . .

    Happy 2017!
     

    Attached Files:

    47v6 and homersdog like this.
  7. May 12, 2018
    IRQVET

    IRQVET Bubbaification Exorcist

    Tallahassee, FL.
    Joined:
    Feb 5, 2015
    Messages:
    680
    I'm still alive. Wife had another kid, I guess its mine; looks just like me. Jeep is in limbo, I have to admit my motivation on finishing was compromised quite a bit. Then my co-worker pulled up in his dads 44 Willy's a few days ago, so a new fire was lit under my a$$.

    Moving forward, the punch list includes:

    1. Addressing the re-wiring situation (Faultless or EZ)?
    2. Need some headers . . . (sugguestions needed)
    3. Finish the H.E.I. distributor
    4. Scuff and shoot the last coat of paint. (No Goldmember this time)
    5. Apply the truck bed liner to the interior floors
    6. I need to do something else, but I can't remember what it was that I needed to accomplish. (Age it getting to me, who are you people again?)
     

    Attached Files:

    piffey263 and tymbom like this.
  8. May 12, 2018
    homersdog

    homersdog Tulsa, Ok 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Tulsa, OK
    Joined:
    Jan 8, 2012
    Messages:
    2,356
    here is a recent thread about headers that may help with that question. Glad you are getting this project going again!

    Hedman Headers Question.
     
  9. May 30, 2018
    IRQVET

    IRQVET Bubbaification Exorcist

    Tallahassee, FL.
    Joined:
    Feb 5, 2015
    Messages:
    680
    6. Finish the HEI installation. I knew I forgot something.
     
  10. May 31, 2018
    IRQVET

    IRQVET Bubbaification Exorcist

    Tallahassee, FL.
    Joined:
    Feb 5, 2015
    Messages:
    680
    Update:

    I have my buddy from work coming by this weekend to rebuild the Rochester 2 Barrel carb. He has a 73 CJ5 and a few hot rods so he said he is down to help the less fortunate, aka the mechically disinclined (me).

    Tomorrow the EZ Wiring kit will arrive in the mail from Home | E Z Wiring | Florida USA

    I ordered replacement (used) battery tray ($50) from J&W Jeep - J&W Auto Wreckers - New & Used Jeep Parts since nobody makes a repop for the Dauntless; which should be here on Monday.

    I ordered the new speedo from www.kaiserwillys.com but its on backorder 45 days + . . .

    My wife and kids are leaving to California to visit family for a week, so I'll have alot more free time to get cranking. Plus it gives me a few days to hide all the stuff I bought.

    :D
     
    fhoehle and Buildflycrash like this.
  11. Jun 2, 2018
    IRQVET

    IRQVET Bubbaification Exorcist

    Tallahassee, FL.
    Joined:
    Feb 5, 2015
    Messages:
    680
    So I'm having this internal battle going on in my head. The perfectionist in me is going nuts because the radiator is off center. The reason being is because I read (somewhere) to be mindful of the proximity of your radiator to your brake lines as to not lose braking power when the vehicle gets hot. So I had to move it toward the passenger side for three reasons; 1. The proximity to the brakes lines on the drivers side. 2. So those rods that go from the firewall to the grill on the snub nose models like mine have a home in the proximity where they are supposed to be. 3. Clearance issue between the fan blade and radiator hose on the passenger side.

    I know my new aim is to just get Jeep running, and aesthetics are not my priority. But it still drives me a little nuts.

    :banghead:

    BTW, I'm missing a headlight trim ring. Must have went MIA during the last move.

    And yes, I paint bright orange on the handles of all my tools, because I'm the type that spend 2 minutes working with them, and 2 hours looking for them . . . :D
     

    Attached Files:

    Last edited: Jun 2, 2018
  12. Jun 23, 2018
    IRQVET

    IRQVET Bubbaification Exorcist

    Tallahassee, FL.
    Joined:
    Feb 5, 2015
    Messages:
    680
    Spent 2 days +/- making the cuts on the body and body armor for the 4 inch recessed LED's. I think I had to meassure like 40 times I was paranoid they would be off center. Plus we've all seen lights installed either too high or too low and thought WTF was he thinking? My solution, weld patch panels into the original holes and DON'T try to match the factory location. (To low, to inward IMHO). I wanted mine proportionate with the body armor.

    Not a ton of progress . . . But its not as simple as I thought. In my simple brain; 4 inch LED= 4 and 1/8 circular cutting wheel. (Burnt up one drill Harbor Freight drill in the process). Then I learned (after the fact) that the LED's were 4 inches, but the hole needed to be closer to 4.5 inches to house the rubber grommets. So some careful grinding took place. Following by more grinding; followed by a few four letter words; and then some more grinding.

    Lesson learned for when I have to drill out the turn signals and back-up lights!
     

    Attached Files:

    Last edited: Jun 23, 2018
    Hellion and homersdog like this.
  13. Jul 12, 2018
    IRQVET

    IRQVET Bubbaification Exorcist

    Tallahassee, FL.
    Joined:
    Feb 5, 2015
    Messages:
    680
    I took one step forward getting my repop speedo, but two steps back with my engine issue(s).

    my speedo.JPG
     
  14. Jun 18, 2019
    IRQVET

    IRQVET Bubbaification Exorcist

    Tallahassee, FL.
    Joined:
    Feb 5, 2015
    Messages:
    680
    Sold my project to nice Canadian couple tonight, thanks for all the advice and the memories; you folks are top notch in my book.

    I'll see ya'll after my kids are grown and I have more time for a project. Salute!
     
  15. Jun 18, 2019
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,559
    Bummer.
    But I think it’s in his blood.
    He’ll never stop looking at CL and FB will show him Jeeps forever!
     
    ojgrsoi likes this.
  16. Jun 19, 2019
    Hellion

    Hellion Regurgitated

    Eastern TN
    Joined:
    Dec 25, 2016
    Messages:
    534
    That's the saddest thing I've read in a while. :( :cry:
     
  17. Jun 19, 2019
    johneyboy03

    johneyboy03 The green beast

    Quebec, Canada
    Joined:
    Jan 15, 2011
    Messages:
    2,115
    Remind me when i install mine....took a lot a mesure since it was a fiber glass body. But i wont go back now i have them :p


    I just change mine with a new brand that make a 3 fonction in the same light, brake/turn, parking and reverse light.

    4" Red Stop, Turn & Tail to White Back Up LED Light (19 Diodes) - 4" Dual Revolution LEDs - Dual Revolution LEDs - LED Lighting
     
  18. Dec 16, 2020
    dhuber

    dhuber New Member

    West Kelowna...
    Joined:
    Feb 18, 2019
    Messages:
    6

    Pictures of IRQVET's 67 CJ5 now. Body was stripped, all rust spots removed and repainted Fountain Green then mounted on a 1960 chassis. The 60 has now been restored to original. It belonged to my father-in-law who bought it new. Next project is to put the rusty 60 body on to the 67 chassis and get it back up and running. Many thanks to everyone on this site!
     
    fhoehle, IRQVET, jeep peep69 and 8 others like this.
  19. Dec 16, 2020
    dhuber

    dhuber New Member

    West Kelowna...
    Joined:
    Feb 18, 2019
    Messages:
    6
  20. Dec 17, 2020
    Mr Vaughan

    Mr Vaughan

    i've never met a not nice canadian:lol:
     
    IRQVET and fhoehle like this.
New Posts