1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Roll Bar Build

Discussion in 'Builds and Fabricators Forum' started by PieLut, Aug 20, 2016.

  1. Aug 20, 2016
    PieLut

    PieLut Member

    Glendale, Arizona
    Joined:
    Jul 20, 2010
    Messages:
    464
    Hello Gents, made some headway on the 70' Renegade. I made two time lapse videos of the fab process. I copied the bar in the 66' which matches the original style. Just need to give it some paint.
    A few details: Built from 2" x 0.120 wall HREW. The mounting base is made from 1/8" flat stock.





    [​IMG]

    [​IMG]
     
    PieLut, Aug 20, 2016
    #1
    ITLKSEZ likes this.
  2. Aug 20, 2016
    55_Willys_CJ5

    55_Willys_CJ5 Nephews Visit 2017 2024 Sponsor 2023 Sponsor

    Southern California
    Joined:
    Aug 4, 2015
    Messages:
    322
    Nice work.
     
    55_Willys_CJ5, Aug 20, 2016
    #2
  3. Aug 20, 2016
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,801
    That looks great!
     
    47v6, Aug 20, 2016
    #3
  4. Aug 20, 2016
    mickeykelley

    mickeykelley Well-Known Member

    Republic of Texas
    Joined:
    Oct 10, 2015
    Messages:
    1,909
    Video doesn't work for me. Bottom one as me to login???? Just out of curiosity, how much do you have in it? As soon as carb get back from restore, rollback next on list.
     
    mickeykelley, Aug 20, 2016
    #4
  5. Aug 20, 2016
    aallison

    aallison 74 cj6, 76 cj5. Has anyone seen my screwdriver?

    Green Cove...
    Joined:
    Nov 24, 2006
    Messages:
    1,929
    video set for private for me. What did you bend the tube with?
     
    aallison, Aug 20, 2016
    #5
  6. Aug 21, 2016
    PieLut

    PieLut Member

    Glendale, Arizona
    Joined:
    Jul 20, 2010
    Messages:
    464
    I changed the videos to public, should work now. I used an M-TEC bender with an air/hydraulic unit
     
    PieLut, Aug 21, 2016
    #6
  7. Aug 21, 2016
    Mark Wahlster

    Mark Wahlster Member

    Silverton, OR
    Joined:
    Dec 17, 2015
    Messages:
    386
    WAY WAY lighter then mine. Dad used SCH80 2" Steam pipe for the main hoop and 1.5" steam pipe for the angled braces to bases almost as large as the tops of the wheelhouses out of 1/4" boiler plate. LOL
     
    Mark Wahlster, Aug 21, 2016
    #7
New Posts