1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ramsey Pto Winch Disassembly Question

Discussion in 'Winches' started by Seadiver5, Feb 24, 2020.

  1. Feb 24, 2020
    Seadiver5

    Seadiver5 New Member

    Joined:
    Nov 1, 2005
    Messages:
    33
    I'm trying to reseal an old Ramsey 200 PTO winch. I'm disassembled to the point where the main gear housing is open and the gears need to be removed. I'm not sure which gear to remove first or how to do it. I don't want to break anything if possible because everything is in great shape and most of the hard parts are no longer available. I can press them out if necessary I just need to know which gear to remove first and if there are any tricks I need to know. All details would be helpful.
     
  2. Feb 25, 2020
    Howard Eisenhauer

    Howard Eisenhauer Super Moderator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    6,232
    The worm screw has to come out first.
     
    Seadiver5 likes this.
  3. Feb 25, 2020
    jpflat2a

    jpflat2a what's that noise?

    Riverside CA
    Joined:
    Jul 30, 2003
    Messages:
    7,994
    Might help.
    [​IMG]
    [​IMG]
     
    Seadiver5 likes this.
  4. Feb 25, 2020
    Seadiver5

    Seadiver5 New Member

    Joined:
    Nov 1, 2005
    Messages:
    33
    Is there any tips on getting it out first? Which direction should it be driven? should it be Twisted as it comes out? It appears from the blow apart above that there are no clips or anything like that to remove. I just want to make sure not to break anything.

    Thanks
     
  5. Feb 25, 2020
    Howard Eisenhauer

    Howard Eisenhauer Super Moderator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    6,232
    Just remove the bearing caps (516 & 565 per the diagram) & screw the thing out the back.

    It would take a *very* big hammer to break anything, don't use a *very* big hammer & you'll be fine :)
     
    Seadiver5 likes this.
  6. Feb 25, 2020
    Seadiver5

    Seadiver5 New Member

    Joined:
    Nov 1, 2005
    Messages:
    33
    Done. Thanks so much for the help.
     

    Attached Files:

  7. Feb 27, 2020
    Seadiver5

    Seadiver5 New Member

    Joined:
    Nov 1, 2005
    Messages:
    33
    All back together. I'm going to need to rework the mounting bracket some when I actually install it but I'm very happy with how it turned out. Interesting side note. This winch has a spacer on the shaft so the winch won't go into free spool. I can't find the part on any of the blow apart diagrams I've found so I'm assuming that whoever had it before me wanted to only use it as a power in power out winch. Ramsey Winch 1.jpg Ramsey Winch 2.jpg Ramsey Winch 1.jpg Ramsey Winch 2.jpg
     
    Desert Runner likes this.

Share This Page

New Posts