1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Project...Kahuna 66 cj6

Discussion in 'Builds and Fabricators Forum' started by bkd, May 11, 2007.

  1. Sep 10, 2010
    bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    K-Town Tenn.
    Joined:
    Apr 29, 2007
    Messages:
    3,294
    havn't touched it and have another project rolling in tomorrow :rofl:
    think I'll have 5-6 hours tomorrow though :)
    git er done Joel R)
     
  2. Sep 10, 2010
    Dummy

    Dummy I kick hippies

    Escondido, CA
    Joined:
    Dec 5, 2004
    Messages:
    646
    Well, if ya got to have problems this is the kind to have! :beer:
     
  3. Sep 10, 2010
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    wow , nothing to swamped good for you jim.
    I can go up there to pour, and put the 6 back together.
     
  4. Sep 12, 2010
    bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    K-Town Tenn.
    Joined:
    Apr 29, 2007
    Messages:
    3,294
    Hey Joel! :D[​IMG]
    Jim
     
  5. Sep 12, 2010
    jzeber

    jzeber Well-Known Member 2022 Sponsor

    Morgan Hill, Ca
    Joined:
    Nov 15, 2003
    Messages:
    3,323
    Looking good Jim, you getting ready to bench press that bad boy back in?
     
  6. Sep 12, 2010
    HeavyIron

    HeavyIron Member

    So Cal or East...
    Joined:
    Oct 1, 2007
    Messages:
    570
    That's what Taylor's are for! R)
     
  7. Sep 12, 2010
    bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    K-Town Tenn.
    Joined:
    Apr 29, 2007
    Messages:
    3,294
    after church we'll ( Taylor and I) put it on the tranny jack and get it installed......least wise that's the plan :)
     
  8. Sep 13, 2010
    bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    K-Town Tenn.
    Joined:
    Apr 29, 2007
    Messages:
    3,294
    tried to install the trans/tc Sunday afternoon by myself (Taylor was otherwise engaged) and after several attempts the assembly came off the jack and crushed my left hand :rofl:.......after icing the hand for several hours and some pain meds I determined it wasn't broken :)..........little swollen but I got lucky
    Tonight I got Taylor to come help and we strapped the assembly onto the jack and after some well chosen words and a little sweat it finally lined up and went together................just need to get linkages hooked up, cross member in, and interior back together :beer:
    [​IMG]
    [​IMG]
    should have it finished and ready to road test by tomorrow late afternoon
    Jim
     
  9. Sep 13, 2010
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    :toetap:
     
  10. Sep 13, 2010
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    OUCH! I quess ,,,,,,,,,better your hand than the head with teeth right?
     
  11. Sep 13, 2010
    Vanguard

    Vanguard Take Off! Staff Member

    Vista, CA USA
    Joined:
    Aug 30, 2006
    Messages:
    2,256
    Ouch. Sorry to hear about your hand. Pics later. But Betsy went down the road on Saturday after a minor linkage tweak. Glad she's back together.
     
  12. Sep 13, 2010
    EricM

    EricM Active Member

    Southern California
    Joined:
    Dec 19, 2007
    Messages:
    1,019
    x2

    A picture is worth a thousand words...


    [​IMG]
     
  13. Sep 14, 2010
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    Eric..................................!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
     
  14. Sep 14, 2010
    Dummy

    Dummy I kick hippies

    Escondido, CA
    Joined:
    Dec 5, 2004
    Messages:
    646
    Did his handle just change from "Cougar Bait" to "Tinkle Bell"? R)
     
  15. Sep 14, 2010
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,513
    oohh
    I like it !
     
  16. Sep 14, 2010
    Vanguard

    Vanguard Take Off! Staff Member

    Vista, CA USA
    Joined:
    Aug 30, 2006
    Messages:
    2,256
    That bell is clearly for an F-134. A V6 needs more cowbell. :D
     
  17. Sep 14, 2010
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    lets get this straight , Eric hung that little cutesy bell on my junk when I was not looking ,,,,,and I shot him a glance so tough that he ran over to it and removed it without making eye contact.....
     
  18. Sep 14, 2010
    EricM

    EricM Active Member

    Southern California
    Joined:
    Dec 19, 2007
    Messages:
    1,019
    agreed. And at no time did I disturb any Hello Kitty merchandise that may or may not have been on said junk.
     
  19. Sep 14, 2010
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    I've got the Power........................Rangers
     
  20. Sep 14, 2010
    bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    K-Town Tenn.
    Joined:
    Apr 29, 2007
    Messages:
    3,294
    hope ya'll are having fun :rofl:.....tinker, I love it
    got everything bolted up, need some gear oil and inspect why I have no clutch pedal....getting close
    Jim
     
New Posts