1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Pookie,s Build

Discussion in 'Builds and Fabricators Forum' started by Pookie, Jul 19, 2017.

  1. Aug 1, 2017
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Originates from Facebook? My anti-tracker program is currently blocking some content from Facebook.
     
  2. Aug 1, 2017
    Fly Navy

    Fly Navy Member

    Emerson, IA
    Joined:
    Jun 6, 2014
    Messages:
    361
    I don't see it either...
     
  3. Aug 1, 2017
    Pookie

    Pookie New Member

    Mass
    Joined:
    Nov 13, 2016
    Messages:
    31
    I've tried 3 pics and am having issues I guess. The rear axles are a welded wheel hub which I assume is a later model?
     
  4. Aug 1, 2017
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Is the picture hosted somewhere, or are you trying to embed it? If it's hosted somewhere, just put a link to it.
     
  5. Aug 1, 2017
    Pookie

    Pookie New Member

    Mass
    Joined:
    Nov 13, 2016
    Messages:
    31
    I am pulling it off my I pad pics and adding it to media
     
  6. Aug 1, 2017
    Norcal69

    Norcal69 Out of the box thinker 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Northern California
    Joined:
    Sep 6, 2014
    Messages:
    3,548
    That is a flanged axle. The axle and hub are all one piece. That is a more desirable axle than the older two piece setup.
     
  7. Aug 14, 2017
    Pookie

    Pookie New Member

    Mass
    Joined:
    Nov 13, 2016
    Messages:
    31
    The new rear cores are done with the west system and cloth coated with the harbor freight undercoater time to wire and tidy up the tub. Getting ready for the frame to be finished and start the install this fall
     
  8. Sep 1, 2017
    Pookie

    Pookie New Member

    Mass
    Joined:
    Nov 13, 2016
    Messages:
    31
    Dash back in and roll bar on almost ready to fit to the frame when it's done.
     
  9. Sep 6, 2017
    Pookie

    Pookie New Member

    Mass
    Joined:
    Nov 13, 2016
    Messages:
    31
    Has anyone had any experience with a replacement frame from throttledown customs. I have a opertunity to buy one for short money but am not sure of the quality??
     
New Posts