1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

pilot bushing depth on 225 v6

Discussion in 'Early CJ5 and CJ6 Tech' started by mxdigger, Sep 25, 2009.

  1. Sep 25, 2009
    mxdigger

    mxdigger Member

    Rathdrum, ID
    Joined:
    Sep 7, 2009
    Messages:
    55
    quick question: does anyone know if there will be any problem if my pilot bushing is about 1/8" from being flush to the crank. ive driven it in as far as i can and it doesnt seem to want to go any further. i drove it in completely straight so i know its not crooked....it just doesnt seem to wanna drive in any more.
    thanks,
    dustin
     
    mxdigger, Sep 25, 2009
    #1
  2. Sep 25, 2009
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,522
    sounds good to me
    as long as the pilot shaft goes in smoothly
    most of the Jeep trans have an extra long pilot tip on the end of the shaft anyway.
     
    jpflat2a, Sep 25, 2009
    #2
  3. Sep 25, 2009
    Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    cordele, Ga.
    Joined:
    Mar 29, 2007
    Messages:
    5,922
    Yep-- X2 -- You will ge good with that.
     
    Walt Couch, Sep 25, 2009
    #3
  4. Sep 25, 2009
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    I think it should work :)
     
    cj6/442, Sep 25, 2009
    #4
New Posts