1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Picture Request- King-seeley Instrument Regulator

Discussion in 'Early Jeep Restoration and Research' started by Howard Eisenhauer, Mar 31, 2017.

  1. Mar 31, 2017
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,122
    Anyone got a pic of one of these things, hopefully showing where it mounts & what style connectors they use?

    I'm trying to figure out if a late 50's - 70's Ford one will work & which one would be the best match.

    Thanks,

    H.
     
    Howard Eisenhauer, Mar 31, 2017
    #1
  2. Mar 31, 2017
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,190
    Is this on the back of a six volt speedo cluster?
     
    SIDSCJ, Mar 31, 2017
    #2
  3. Mar 31, 2017
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,122
    Yes.
     
    Howard Eisenhauer, Mar 31, 2017
    #3
  4. Mar 31, 2017
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,190

    I'll get a better pic
     
    SIDSCJ, Mar 31, 2017
    #4
  5. Mar 31, 2017
    Framer Mike P

    Framer Mike P Member

    Hopkinton, NH
    Joined:
    Jan 4, 2016
    Messages:
    218
    On mine the mounting tab on the regulator mounts under the screw at the 3 o'clock position in the above picture. I think the tab is hidden by the regulator above. I think there is an original regulator on ebay...
     
    Framer Mike P, Mar 31, 2017
    #5
  6. Mar 31, 2017
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,122
    There is but it's a crummy picture, it's pricey & the Ford units are designed to handle 12 volts.

    H.
     
    Howard Eisenhauer, Mar 31, 2017
    #6
  7. Mar 31, 2017
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,190
    Tab is on the reg, can't see it in the pic. Reg screw eyelet terminals, one on the right is single wire to the fuel gauge , other is a double wire that goes to? They are cut off on mine. Buy mine, comes with speedo attached:lol:
     
    SIDSCJ, Mar 31, 2017
    #7
  8. Mar 31, 2017
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,122
    Already got all I can use :)

    H.
     
    Howard Eisenhauer, Mar 31, 2017
    #8
  9. Mar 31, 2017
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,190
    VR pics
     
    SIDSCJ, Mar 31, 2017
    #9
  10. Mar 31, 2017
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,122
    Thanks Sid :)

    According to the 6 volt wiring diagram one of the cut wires came from the ignition & the other went off to the coil.
    [​IMG]

    H.

    H.
     
    Howard Eisenhauer, Mar 31, 2017
    #10
  11. Mar 31, 2017
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,122
    And just for fun-

    upload_2017-3-31_21-15-13.png

    H.
     
    Howard Eisenhauer, Mar 31, 2017
    #11
New Posts