1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Need Help Identifying Driveshaft U-joints On 59 Cj5

Discussion in 'Early CJ5 and CJ6 Tech' started by Mark T., Mar 9, 2017.

  1. Mar 9, 2017
    Mark T.

    Mark T. Member 2022 Sponsor

    Gilbert, AZ
    Joined:
    Nov 9, 2015
    Messages:
    160
    Putting stuff back together now and my FSM calls for Spicer type U-joints on the ends of the drive shafts but I don't see a size or part number anywhere. I've been searching around on here for a discussion about them but I seem to get caught reading about small u joints and larger u joints.

    Can anyone point me to a source that I can learn about what sizes fit these early CJ5's? Is it the Spicer 1310 for front and rear drive shafts?
     
    Last edited: Mar 9, 2017
  2. Mar 9, 2017
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,754
  3. Mar 9, 2017
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Bozeman, MT
    Joined:
    Jul 18, 2013
    Messages:
    5,593
    You are correct - the discussions about large vs small ujoint is for the front driveshaft on V6 cj5. I think all 4 ujoints on a 4 cyl jeep should be the 1310s
     
    Mark T. likes this.
  4. Mar 10, 2017
    Daryl

    Daryl Sponsor

    Bonney Lake, WA
    Joined:
    May 25, 2006
    Messages:
    2,871
    Same rear driveline u-joint from 1941 to 1986. Any parts counter anywhere should be able to do that for you.
     
    Mark T. likes this.
New Posts