1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Mounting the original hitch

Discussion in 'Early Jeep Restoration and Research' started by speedbuggy, Jul 26, 2005.

  1. Jul 26, 2005
    speedbuggy

    speedbuggy Looking for a Jeep now

    Living the Good...
    Joined:
    Jul 1, 2004
    Messages:
    1,270
    Can anyone tell me what size bolts to use to mount the original hitch back on speedy? I think there are a couple of sizes, but not sure... TIA
     
  2. Jul 26, 2005
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    3/8" I think.........
     
  3. Jul 26, 2005
    beeser

    beeser Member

    Arizona
    Joined:
    Jan 8, 2003
    Messages:
    587
    Which ones, the braces that go back to the inside crossmember or the rear cross member?
     
  4. Jul 26, 2005
    Mark W.

    Mark W. Banned

    Joined:
    Jun 25, 2005
    Messages:
    71
    Use the largest bolts that will fit in the holes you have. If 3/8 fits use them if you can squeeze 7/16" bolts thru the holes use those. The bigger the better and be sure to use Grade 8 bolts and nuts along with lock washers if you are planning on using the hitch.
     
  5. Jul 27, 2005
    speedbuggy

    speedbuggy Looking for a Jeep now

    Living the Good...
    Joined:
    Jul 1, 2004
    Messages:
    1,270
    3/8" on the sides, 7/16" on the 4 bolts in the center. That's the biggest that will fit. Thanks for the help!
     
  6. Jul 27, 2005
    Steffy

    Steffy New Member

    Pittsburgh, PA
    Joined:
    Jan 30, 2003
    Messages:
    38
    3/8 and 7/16. Thats what i used.
     
  7. Jul 27, 2005
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    For Sale? :?
     
  8. Jul 27, 2005
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    BTW - not a "hitch" - in Jeep factory lingo it's a "draw bar". FWIW.
     
  9. Jul 28, 2005
    speedbuggy

    speedbuggy Looking for a Jeep now

    Living the Good...
    Joined:
    Jul 1, 2004
    Messages:
    1,270
    :oops:
     
New Posts