1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Koenig Bed Extension Brake Lamps

Discussion in 'Early CJ5 and CJ6 Tech' started by 1957Willys, May 12, 2018.

  1. May 12, 2018
    1957Willys

    1957Willys Member

    Birmingham, Alabama
    Joined:
    Mar 23, 2012
    Messages:
    698
    How are some of you mounting a extra set of brake lamps on bed extensions for CJ's?
     
    1957Willys, May 12, 2018
    #1
  2. May 14, 2018
    ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Weatherford, TX
    Joined:
    Dec 30, 2002
    Messages:
    2,232
    I didn't but considered Hall 701 tail lights mounted on a small piece of angle near the bottom rear corners. You may have to run a ground along with your two wires because although bolted to the body there may be no metal to metal on the bed extender. The easiest might be some four conductor trailer wiring from a trailer plug to one light and then across under the extender to the other light.
    [​IMG]
     
    ojgrsoi, May 14, 2018
    #2
    Twin2 likes this.
  3. May 14, 2018
    1960willyscj5

    1960willyscj5 Well-Known Member

    Mesa, Arizona
    Joined:
    Nov 27, 2006
    Messages:
    2,793
    Could always get a set of those magnetic base tail/break lights from your local FAPS or Harbour Frieght.
     
    1960willyscj5, May 14, 2018
    #3
    ojgrsoi likes this.
  4. May 22, 2018
    windyhill

    windyhill Sponsor

    PA
    Joined:
    Nov 4, 2006
    Messages:
    1,502
    They make some pretty sweet tiny little LED's now...
     
    windyhill, May 22, 2018
    #4
New Posts