Jk Headlight Upgrade

Good e'nuff fer my Daddy & good enuff fer his Daddy before him & good e'nuff fer me.




H.

 

I havent had a chance to look yet. Im sure there is. All the ones i have from work are only high or low. But they are 90*. Just need to look around a store and see what they have

 

Autozone didnt have h4's but the connector looks the same as the sealed beams?if i get some h4 bulbs they should plug right into the stock wire harness it looks like.
I wasnt able to find any h13 or other dual filament bulbs that had the 90 in them. Bought a connector at the zone and it almost works. A little too long. You could probably screw the ring down but it'll be putting alot of pressure on the connector and bulb.

 

thats not too bad a price. but still more than I wanted to spend on this
The more I look it seems the guys upgrading to the h4 bulbs are also upgrading the housings. I'm still going to play around with the connectors and see if I can get something to work. If I have to I can always drill a hole about 3/4 or 1 inch in the back of the stock light housing.
This is one of those, I'd be doubling the value of the jeep if i bought new housings and bulbs. and it doesn't get used enough to justify it either.

 

I think thats what ill have to do too. Unless i can shave the connector down a little to get another 3/8" out of it